Abrasion and Wear Resistance Steel Plates- 400 AR (400 brinell hardness) Plates, 450 AR (450 brinell hardness) Plates, 500 AR (500 brinell hardness)Plates
Abrasion and Wear Resistant Steel Plates in Grades HARDOX 400, HARDOX 450, HARDOX 500, RAEX 400, RAEX 450, RAEX 500, FORA 400, FORA 450, FORA 500, JFE EH 360LE, JFE EH 400LE, AR400, AR450, AR500, SUMI-HARD 400, SUMI-HARD 500
Importer, Stockholder, Suppliers and Exporter of Abrasion and Wear Resistance Steel plates in India
Abrasion and Wear Resistant Steel Plates (Brinell hardness 400 / 450 / 500)
Steber Steel offers Abrasion And Wear Resistant Steel Plates. Wear resistant steel pates is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Steels with a high HB rating (Brinel Hardness) are intended for applications where wear or abrasion resistance is important. The benefit of using an abrasion resistant steel is that that the plant, machinery or constructions working life can be extended considerably. This can significantly improve the reliability, durability and safety of structures and equipment.
Steels with a high HB rating (Brinell hardness) are intended for applications where wear or abrasion resistance is important. The benefit of using an abrasion resistant steel is that that the plant, machinery or constructions working life can be extended considerably. This can significantly improve the reliability, durability and safety of structures and equipment. It also helps to reduce the maintenance costs associated with wear and breakdown of plant
It also helps to reduce the maintenance costs associated with wear and breakdown of plant. 400 HB steel is over 3 times harder than mild steel (120HB), but only a third as hard as stainless steel (1250HB).
Abrasion & mechanical wear-resistant steel plates for quarries & construction machinery: gravel & stone conveying plants (routes, chutes, hoppers) & crushing plants. Shovels, diggers, graders, bulldozers, dumpers, dredging machines, crushers, grinders, screens, hoppers, mixers, moulds for concrete aggregates. Wear resistance plates for mining machinery. Extractors, unloaders, spiral chutes, crushers, grinders, screens, conveyors. Abrasion-resistant steel plates for Cement Plants & Refractory Product Plants: hoppers, crushers, chutes, cyclones, excavator buckets
We can supply:
Thickness from 5mm to 150mm
Width: from 1,500mm to 2,500mm
Length: from 6,000mm to 12,000mm
Technical conditions
1) Ultrasonic tested as per SA 578 or any other as per requirement
2) MTC acc to EN 10204 / 3.2
3) Charpy Impact tested at -20 / – 46 DegC.
4) Furnace Normalised
5) BQ Plates with IBR form IV
The steel is quenched which provides wear resistance; in order to improve hardness it may also be tempered. Lower HB’s generally provide good cold bending properties and good weld ability. Weld ability is not generally reduced as the hardness increases.
Wear resistant steels are not appropriate for use at temperatures over 250°C as the heat can cause changes to the material properties.
Testing is undertaken by firing 10mm steel or tungsten carbide ball at 29kN and the size of the resulting indentation is measured. Tests are carried out according to EN ISO 6506 or ASTM E10. The figures below are representative of 15mm thick 400HB and 500HB plates.
Yields for 400HB steel are in the region of 1100 MPa with tensile strengths of about 1250 MPa.
Wear resistant plates from Steber Steel are available in the following dimensions and certificated to EN 10204 3.1 B, dependent on the product required.
Brand name supplied by us is of TISCRAL / SAILHARD/ JISCRAL/ LAS07 / HARDOX / DILLIDUR / DUROSTAT / ABRASO / XAR AND Other well known brands.
Brand & trademark names
- HARDOX 400, HARDOX 450, HARDOX 500,
- RAEX 400,
- RAEX 450,
- RAEX 500,
- FORA 400,
- FORA 450,
- FORA 500,
- QUARD 400,
- QUARD 400,
- QUARD 450
- DILLIDUR 400 V, DILLIDUR 450 V, DILLIDUR 500 V,
- JFE EH 360LE
- JFE EH 400LE
- AR400,
- AR450,
- AR500,
- SUMI-HARD 400
- SUMI-HARD 500
400 AR Abrasion Resistant Steel (400 Brinell)
As a martensitic hardenable abrasion resistant steel, 400 AR can be used in a variety of hard wearing applications where abrasive qualities and resistance to heavy surface pressure are critical.
Typical Applications
- Mining industry machinery
- Earth moving machinery
- Heavy wear platforms
- Industrial hoppers, funnels and feeders
The actual hardness ranges for this steel relating to particular thicknesses are provided below:
| Grade |
Product |
Thickness (mm) |
Hardness Range (HBW) |
|
400 AR |
Cut Lengths |
2.5 – 6.4 |
360 – 420 |
|
400 AR |
Heavy Plates |
5 – 15 |
360 – 420 |
|
400 AR |
Heavy Plates |
15- 30 |
360 – 450 |
|
400 AR |
Heavy Plates |
30 – 60 |
360 – 480 |
400 AR is available in cut lengths of between 2.5 and 6.4mm thick and as heavy plates between 5-60mm thick. Steber Steel stock and can ship 400 AR abrasion resistant steel to customers, worldwide.
Chemical Composition
| Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
B |
|
400 AR |
0.25 |
0.7 |
1.70 |
0.025 |
0.015 |
1.50 |
0.70 |
0.5 |
0.005 |
Content % max unless otherwise stated. Aluminium and can titanium additionally used as a micro-alloy material.
Mechanical Properties
| Grade |
Yield Strength |
Tensile Strength |
Elongation |
Impact Strength |
|
400 AR |
1000 |
1250 |
10 |
-40°C |
Typical values based on 20mm plate thickness
450 AR Abrasion Resistant Steel (450 Brinell)
Used throughout the mining and earthmoving industry, 450 AR is abrasion resistant steel with 450 brinell hardness.
The steel is a martensitic hardenable material with excellent high strength and hardness properties making it an ideal choice for heavy wear environments. Whilst the material cannot be heat treated, it is easy to cut and weld and has good formability.
The material is referred to as a 450 brinell hardness steel the actual hardness range values for this grade relating to thickness are listed below:
| Grade |
Product |
Thickness (mm) |
Hardness Range (HBW) |
|
450 AR |
Cut Lengths |
3.0 – 6.4 |
420 – 500 |
|
450 AR |
Heavy Plates |
6 – 60 |
420 – 500 |
Steber Steel can supply 450 AR from stock for distribution to clients worldwide. Please refer to the chemical and mechanical properties below:
Chemical Composition
| Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
B |
|
450 AR |
0.26 |
0.7 |
1.70 |
0.025 |
0.015 |
1.00 |
0.70 |
0.5 |
0.005 |
Content % max unless otherwise stated. Aluminium and can titanium additionally used as a micro-alloy material.
Mechanical Properties
| Grade |
Yield Strength |
Tensile Strength |
Elongation |
Impact Strength |
|
450 AR |
1200 |
1450 |
8 |
-40°C |
Typical values based on 20mm plate thickness
500 AR Abrasion Resistant Steel (500 Brinell)
500 AR is a 500 brinell grade steel which is ideal for heavy wear applications commonly found in the mining and earth moving industry.
The material has excellent tensile strength and hardness, infact 500 AR has 3 times the hardness of S355 structural steel. The steel has a martensitic micro-structure and whilst heat treatment is not an option (since this would reduce the materials strength and abrasive qualities), 500 AR is easy to weld using conventional methods and has good formability.
The material is referred to as a 500 brinell hardness steel the actual hardness range values for this grade relating to thickness are listed below:
| Grade |
Product |
Thickness (mm) |
Hardness Range (HBW) |
|
500 AR |
Cut Lengths |
4.0 – 5.5 |
450 – 540 |
|
500 AR |
Heavy Plates |
5 – 60 |
450 – 540 |
Steber Steel can supply 500 AR from stock for distribution to our clients worldwide. Please refer to the chemical and mechanical properties below:
Chemical Composition
| Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
B |
|
500 AR |
0.30 |
0.7 |
1.70 |
0.025 |
0.015 |
1.00 |
0.70 |
0.5 |
0.005 |
Content % max unless otherwise stated. Aluminium and can titanium additionally used as a micro-alloy material.
Mechanical Properties
| Grade |
Yield Strength |
Tensile Strength |
Elongation |
Impact Strength |
|
500 AR |
1250 |
1450 |
8 |
-30°C |
Typical values based on 20mm plate thickness
Contact Steber Steel today for a Abrasion and Wear Resistance Steel Plates competitive quotation…
call : (+91) 22-23824442
e-mail: sales@stebersteel.net