API 5L GRADE B Carbon Steel Pipes & Tubes

API 5L ERW Carbon Steel Pipes Grade X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2

 Importers, Stockholder, Suppliers and Exporter of API 5L Grade B carbon Steel ERW Pipes in India

API 5L Carbon Steel ERW Pipes & Tubes

Carbon steel pipes manufacturer & supplierThis specification covers seamless and welded steel line pipe. It includes standard-weight and extra-strong threaded line pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, special plain-end, extra-strong plain-end pipe; as as well as bell and spigot and through-the-flow line(TFL) pipe.

The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
Sizes (Seamless): 1/2NB – 60NB
Sizes (ERW): 1/2NB – 24NB

Sizes (SAW): 16NB – 100NB

Wall Thickness available:
Schedule 20 – Schedule XXS (heavier on request) up to 250 mm thk.

Material Grades

 High Temperature Seamless Pipe

 ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B

 Heat Exchanger Seamless Tube

 ASTM A179

 Low Temperature Seamless Pipe

 ASTM A333 Gr. 3/6

 Low Temperature Seamless Tube

 ASTM A334 Gr. 6

 High Yield Seamless Pipe

 API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2

 High Yield Seamless Pipe

 ISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485

 Atmospheric & Low Temp EFW Pipes

 ASTM A671 Gr. CC60/CC65/CC70

 High Pressure & Moderate Temp EFW Pipes

 ASTM A672 Gr. B60/B65/B70/C55/C60/C65/C70

 High Yield ERW/SAW Pipe

 API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2

 High Yield ERW/SAW Pipe

 ISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485

Additional Testing :
 NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc.

API 5L Gr B Carbon Steel ERW Pipe Dimensions:

All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.

API 5L Gr B Carbon Steel ERW PipeChemical Composition 

The composition of pipe furnished to this specification, as determined by heat analysis for pipe other than Grade X 80, shall conform to the chemical requirements specified in Table 2, except that by agreement between the purchaser and the manufacturer carbon contents higher than those specified may be used. the composition of intermediate grades(higher than X42)shall conform to chenical requirements agreed upon between the manufacturer and the purchaser, and such requirements shall be consistent with the requirements specified in Table 2 for the applicable type of pipe For Grades X42 and higher, by agreement between the purchaser and the manufacturer, element other than columbium, vanadium, and titanium may be used; however, caution should be exercised in determining the quantity that may be present for any particular size and thickness of pipe because the addition of such otherwise desirable elements may alter the weldability of the pipe. 

API 5L Gr B Carbon Steel ERW Pipe API 5L Line Pipe Physical Properties

Line pipe grade designations come from API Spec 5L Specification for Line Pipe. Standard Line Pipe has grade designation A and B. Stronger grades have the designation X followed by the specified minimum yield strength of the pipe steel, measured in kilopounds per square inch (abbreviated ksi), e.g. X60 for pipe having a minimum yield strength of 60 ksi. See the table below for the standard available grades.

API 5L Gr B Carbon Steel ERW Pipe Line Pipe Physical Properties

API 5L Grade

Yield Strength
min.
(ksi)

Tensile Strength
min.
(ksi)

Yield to Tensile Ratio
(max.)

Elongation
min.
%

A

30

48

0.93

28

B

35

60

0.93

23

X42

42

60

0.93

23

X46

46

63

0.93

22

X52

52

66

0.93

21

X56

56

71

0.93

19

X60

60

75

0.93

19

X65

65

77

0.93

18

X70

70

82

0.93

17

X80

80

90

0.93

16

API 5L elongation figures vary with specimen dimensions. Values shown for 0.2 sq. in. specimen.

Line pipe mechanical testing usually omits Reduction of Area (RA) measurement reporting, and Charpy V-Notch (CVN) testing. This prevents use of this pipe as body material above 36 ksi yield strength for API Spec 6A equipment without retesting for Reduction of Area, and in the case of low temperature service, Charpy V-Notch testing as well.

Contact Steber Steel today for a API 5L Gr B Carbon Steel ERW Pipe Carbon Steel Seamless Pipe competitive quotation…
call : (+91) 22-23824442
e-mail: sales@stebersteel.net

API 5L Gr B Carbon Steel ERW Pipe, best quality API 5L Gr B Carbon Steel ERW Pipe, wide variety of API 5L Gr B Carbon Steel ERW Pipe, API 5L Gr B Carbon Steel ERW Pipe India, API 5L Gr B Carbon Steel ERW Pipe distributor Mumbai, API 5L Gr B Carbon Steel ERW Pipe traders, prime quality API 5L Gr B Carbon Steel ERW Pipe, Source for API 5L Gr B Carbon Steel ERW Pipe, specialize in API 5L Gr B Carbon Steel ERW Pipe, API 5L Gr B Carbon Steel ERW Pipe with Test Certificate