ASTM A335 GR P5 | P9 | P11 | P22 | P91 | P91 Alloy Steel Pipe with IBR & NACE Certified
A335 Alloy Steel Seamless Pipes & Tubes | ASTM A335 | GR P5 | P9 | P11 | P22 | P91
ASTM A335 Alloy Steel Seamless Pipes and Tubes Importer, Stockholder, Suppliers and Exporter in India
ASTM A335 Alloy Steel Seamless Pipes
Alloy Steel contains substantial quantities of elements other than carbon like chromium, silicon, nickel, manganese, molybdenum, tungsten, vanadium as well as limited amounts of other commonly accepted elements like sulphur, manganese, silicon & phosphorous. Addition of these alloying elements is usually done for purpose of increasing hardness, strength as well as chemical resistance of the end product.
ASTM A335 GR P5 | GR P9 | GR P11 | GR P22 | GR P91.
Alloy Steel Seamless Pipes (IBR APPROVED & NACE APPROVED)
Alloy Steel Seamless Pipes (IBR) offered by us is made of alloy steel and feature exceptional performance properties. These are developed for energy-related applications involving oil & gas drilling and therefore are subjected to stresses in machine parts. Further, Alloy Steel Tubes are also used in domestic, professional or industrial areas.
- ASTM A335 PIPES
- ASTM A335 GR P5 PIPES
- ASTM A335 GR P9 PIPES
- ASTM A335 GR P11 PIPES
- ASTM A335 GR P22 PIPES
- ASTM A335 GR P91 PIPES
Size Range: 1/8″ – 26″
Schedules: 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH
ASTM A 335 P5 SEMLESS STEEL PIPE/ALLOY STEEL PIPE (STOCK)
Specification: OD30-457mm WT 3-40mm
Quantity: Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
Alloy Steel Seamless Pipes (ASME SA335 Grade P5) offered by us are made available in ASME SA335 as well as P1, P5, P9, P11, P12, P91 grades. Our expertise lies in offering these in different sizes & schedules, with IBR & latest edition NACE MR 0175 reports.
A335 Pipe Specifications
| A/SA335 | NPS 1/4" – 24" | Schedules 40 through 160, STD, XH and XXH | |
Scope |
This specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. | ||
Material & Manufacture |
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. | ||
Specifications
JFE ASTM A335/ ASME SA335 alloy steel seamless pipe for power plant
Standard:A335
Grade:P1 P2 P5 P9 P11 P12 P15 P22 P91 P92
1. JFE ASTM A335/ ASME SA335 alloy steel seamless pipe for power plant
2.Standard:A335
3.Grade:P1 P2 P5 P9 P11 P12 P15 P22 P91 P92
Type: JFE ASTM A335/ ASME SA335 alloy steel seamless pipe for power plant
Executive standards: ASTM A213/ a335
Grades: T2/T5/T9/T11/T12/T17/T21/T22/T91/T92
A335 P1 P2 P5 P9 P11 P12 P15 P21 P22 P91 P92
Size:6-840mm
Thickness:1-60mm
large diameter with thick wall
Surface:oiled or painted black
Marking:According to custommers’ requirements
Alloy Steel Seamless Pipes (ASME SA335 Grade P5)
Alloy Steel Seamless Pipes (ASME SA335 Grade P5) offered by us are made available in ASME SA335 as well as P1, P5, P9, P11, P12, P91 grades. Our expertise lies in offering these in different sizes & schedules, with IBR & latest edition NACE MR 0175 reports.
Grades: A335 P1 P2 P5 P9 P11 P12 P15 P21 P22 P91 P92
ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9)
ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9) manufactured, supplied and exported by us are used for various industrial applications. Our specialization in offering precision engineered alloy steels allow us to deliver these for various engineering applications in various grades like A-387 GR. P1, P5, P9, P11, P12, P22, P91, ASTM A-335 and others.
Grades: A335 P1 P2 P5 P9 P11 P12 P15 P21 P22 P91 P92
Alloy Steel Pipes (ASTM A335 P11)
Alloy Steel Pipes (ASTM A335 P11) offered by us are made as per IBR standards and are used mainly for boiler operations. We source these seamless pipes in varied size range. Further, we can also get these customized as per boiler piping requirements. For ensuring in them optimum quality standards, we source these from quality manufacturers. We also offer clients of having their own mark on them.
Grades: A335 P1 P2 P5 P9 P11 P12 P15 P21 P22 P91 P92
Alloy Steel Pipes (ASTM A335 P22)
Alloy Steel Pipes (ASTM A335 P22) offered by us are available with ASTM A335 P22 Pipe standard and finds application in industries like Petrochemicals, Refineries, Fertilizers, Pharmaceuticals and others. We can source these seamless pipes in size range of up to 26 inches.
Grades: A335 P1 P2 P5 P9 P11 P12 P15 P21 P22 P91 P92
Alloy Seamless Pipes (ASTM A335 Grade P91 NACE)
Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) offered by us are made available in ASTM A335 Grades. Made as per IBR standards, these are mainly used in boiler operations. Further, our expertise lies in offering these pipes in various size range as well as in customized parameters as per boiler piping requirements. Sourced from quality conscious manufacturers, we also offer our clients the option of adding their own mark on them.
Grades: A335 P1 P2 P5 P9 P11 P12 P15 P21 P22 P91 P92
Alloy Steel Tubes (ASME SA213 Grade T11)
Alloy Steel Tubes (ASME SA213 Grade T11) manufactured and supplied by us are of ASME SA213 Grade. Our expertise lies in offering these in various sizes as well as other specifications as per the required demands. These Alloy Steel Tubes find usage mainly in different industrial applications.
Grades: T2/T5/T9/T11/T12/T17/T21/T22/T91/T92
Tag:
ASTM A335 P5
ASTM A335 P5 seamless pipe
ASTM A335 Gr. P5 casing pipe
ASTM A335 P5 steel pipe
ASTM A335 P5 alloy pipe
Seamless pipe astm A335 p5
Alloy pipe ASTM A335
ASTM A335 alloy seamless pipe
Heat Treatement Requirement
|
|
P5, P9, P11, and P22 |
|
|
|
|
Grade |
Heat Treatment Type |
Normalizing Temperature Range F [C] |
Subcritical Annealing |
|
|
|
|
|||
|
P5 (b,c) |
Full or Isothermal Anneal |
|
||
|
|
Normalize and Temper |
***** |
1250 [675] |
|
|
|
Subcritical Anneal (P5c only) |
***** |
1325 – 1375 [715 – 745] |
|
|
P9 |
Full or Isothermal Anneal |
|
||
|
|
Normalize and Temper |
***** |
1250 [675] |
|
|
P11 |
Full or Isothermal Anneal |
|
||
|
|
Normalize and Temper |
***** |
1200 [650] |
|
|
P22 |
Full or Isothermal Anneal |
|
||
|
|
Normalize and Temper |
***** |
1250 [675] |
|
|
P91 |
Normalize and Temper |
1900-1975 [1040 – 1080] |
1350-1470 [730 – 800] |
|
|
|
Quench and Temper |
1900-1975 [1040 – 1080] |
1350-1470 [730 – 800] |
|
Tensile Requirements
| Seamless | ||||||||
| P-5 | P-9 | P-11 | P-22 | P-91 | P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. | |||
| Tensile Strength, min., psi | ||||||||
| ksi | 60 | 60 | 60 | 60 | 85 | |||
| MPa | 415 | 415 | 415 | 415 | 585 | |||
| Yield Strength, min., psi | ||||||||
| ksi | 30 | 30 | 30 | 30 | 60 | |||
| MPa | 205 | 205 | 205 | 205 | 415 | |||
Chemical Requirements
|
|
Grade |
P-5 |
P-9 |
P-11 |
P-22 |
P-91 |
P-91 shall also include the following: |
|
Element |
UNS Designation |
K41545 |
S50400 |
K11597 |
K21590 |
K91560 |
|
|
Carbon |
0.15 max |
0.15 max |
0.05 – 0.15 |
0.05 – 0.15 |
0.08 – 0.12 |
V at 0.18 – 0.25 |
|
|
Manganese |
0.30 – 0.60 |
0.30 – 0.60 |
0.30 – 0.60 |
0.30 – 0.60 |
0.30 – 0.60 |
N at 0.030 – 0.070 |
|
|
Phosphorous, max |
0.025 |
0.025 |
0.025 |
0.025 |
0.020 |
Ni at 0.40 max |
|
|
Sulfur, max |
0.025 |
0.025 |
0.025 |
0.025 |
0.010 |
Al at 0.02 max |
|
|
Silicon |
0.50 max |
0.25 – 1.00 |
0.50 – 1.00 |
0.50 max |
0.20 -0.50 |
Cb at 0.06 – 0.10 |
|
|
Chromium |
4.00 – 6.00 |
8.00 – 10.00 |
1.00 – 1.50 |
1.90 – 2.60 |
8.00 – 9.50 |
Ti at 0.01 max |
|
|
Molybdenum |
0.45 -0.65 |
0.90 – 1.10 |
0.44 – 0.65 |
0.87 – 1.13 |
0.85 – 1.05 |
Zr at 0.01 max |
|
Permissible Variation in Wall Thickness
|
NPS [DN] Designator |
Tolerance, % from Specified |
|
||||||
|
|
Over |
|
Under |
|
||||
|
1/8 to 2 1/2 [6 to 65] incl., all t/D ratios |
|
20.0% |
|
12.5% |
|
|||
|
Above 2 1/2 [65], t/D < or = 5% |
|
22.5% |
|
12.5% |
|
|||
|
Above 2 1/2 [65], t/D > 5% |
|
15.0% |
|
12.5% |
|
|||
|
(t = Specified Wall Thickness; D = Specified Outside Diameter) |
||||||||
Elongation Requirements
|
Calculated Minimum Elongation Values |
||||||
|
Elongation in 2 in. or 50 mm, min % |
||||||
|
Wall Thickness |
P5, P9, P11, P22 |
P91 |
||||
|
in. |
mm |
Longitudinal |
Transverse |
Longitudinal |
||
|
5/16 (0.312) |
8 |
30 |
20 |
20 |
||
|
9/32 (0.281) |
7.2 |
28 |
19 |
19 |
||
|
1/4 (0.250) |
6.4 |
27 |
18 |
18 |
||
|
7/32 (0.219) |
5.6 |
26 |
17 |
|||
|
3/16 (0.188) |
4.8 |
24 |
16 |
|||
|
5/32 (0.156) |
4 |
22 |
15 |
|||
|
7/8 (0.125) |
3.2 |
21 |
14 |
|||
|
3/32 (0.094) |
2.4 |
20 |
13 |
|||
|
1/18 (0.062) |
1.6 |
18 |
|
|
12 |
|
|
Permissible Variations in Outside Diameter Outside Diameter at any point shall not vary from standard specified more than: |
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
| Mechanical Tests Specified | |
|
Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test |
|
|
For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested. |
|
|
For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe. |
|
|
Notes for Hardness Test: |
P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. |
|
Notes for Bend Test: |
For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test. |
|
Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser. |
|
|
The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion. |
|
|
The inside diameter of the bend shall be 1 inch [25 mm]. |
|
|
Hydrostatic Test |
Each length of pipe shall be Hydro tested, at option of manufacture nondestructive electric testing can be used. |
Reference Documents
- ASTM A999/A 999M Specification for General requirements for Alloy and Stainless Steel Pipe.
- ASTM E 213 Practice for Ultrasonic Examination of metal Pipe and Tubing
- ASTM E 309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
- ASTM E 381 Method of Macroetch testing Steel Bars, Billets, Blooms, and Forgings
- ASTM E 570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
- ASME B26.10M Welded and Seamless Wrought Steel Pipe
Ordering Information
| Quantity | Feet, meters, or number of lengths |
| Name of material | Seamless Alloy Steel Pipe |
| Grade | P5, P9, P11, P22, P91 |
| Manufacture | Hot-finished or cold-drawn |
| Size using one of the following: | |
| NPS and Schedule Number | |
| Outside Diameter and Nominal Wall Thickness | |
| Outside Diameter and Minimum Wall Thickness | |
| Inside Diameter and Nominal Wall Thickness | |
| Inside Diameter and Minimum Wall Thickness | |
| Length | Specific or Random |
| End Finish | |
TABLE 1 Chemical Requirements
| Grade | UNS Designa- tionA |
Composition, % | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Carbon | Man- ganese |
Phos- phorus, max |
Sulfur, max |
Silicon | Chromium | Molybde- num |
Others | ||
| P1 | K11522 | 0.10–0.20 | 0.30–0.80 | 0.025 | 0.025 | 0.10–0.50 | . . . | 0.44–0.65 | . . . |
| P2 | K11547 | 0.10–0.20 | 0.30–0.61 | 0.025 | 0.025 | 0.10–0.30 | 0.50–0.81 | 0.44–0.65 | . . . |
| P5 | K41545 | 0.15 max | 0.30–0.60 | 0.025 | 0.025 | 0.50 max | 4.00–6.00 | 0.45–0.65 | . . . |
| P5b | K51545 | 0.15 max | 0.30–0.60 | 0.025 | 0.025 | 1.00–2.00 | 4.00–6.00 | 0.45–0.65 | . . . |
| P5c | K41245 | 0.12 max | 0.30–0.60 | 0.025 | 0.025 | 0.50 max | 4.00–6.00 | 0.45–0.65 | . . .B |
| P9 | S50400 | 0.15 max | 0.30–0.60 | 0.025 | 0.025 | 0.25–1.00 | 8.00–10.00 | 0.90–1.10 | . . . |
| P11 | K11597 | 0.05–0.15 | 0.30–0.60 | 0.025 | 0.025 | 0.50–1.00 | 1.00–1.50 | 0.44–0.65 | . . . |
| P12 | K11562 | 0.05–0.15 | 0.30–0.61 | 0.025 | 0.025 | 0.50 max | 0.80–1.25 | 0.44–0.65 | . . . |
| P15 | K11578 | 0.05–0.15 | 0.30–0.60 | 0.025 | 0.025 | 1.15–1.65 | . . . | 0.44–0.65 | . . . |
| P21 | K31545 | 0.05–0.15 | 0.30–0.60 | 0.025 | 0.025 | 0.50 max | 2.65–3.35 | 0.80–1.06 | . . . |
| P22 | K21590 | 0.05–0.15 | 0.30–0.60 | 0.025 | 0.025 | 0.50 max | 1.90–2.60 | 0.87–1.13 | . . . |
| P23 | K41650 | 0.04–0.10 | 0.10–0.60 | 0.030 max | 0.010 max | 0.50 max | 1.90–2.60 | 0.05–0.30 | V 0.20–0.30 Cb 0.02–0.08 B 0.0010–0.006 N 0.015 max Al 0.030 max W 1.45–1.75 Ni 0.40 max Ti 0.005–0.060 Ti/N ≥ 3.5C |
| P24 | K30736 | 0.05–0.10 | 0.30–0.70 | 0.020 | 0.010 | 0.15–0.45 | 2.20–2.60 | 0.90–1.10 | V 0.20–0.30 Ti 0.06–0.10 N 0.012 max Al 0.02 max B 0.0015–0.007 |
| P36 | K21001 | 0.10–0.17 | 0.80–1.20 | 0.030 max | 0.025 max | 0.25–0.50 | 0.30 max | 0.25–0.50 | Ni 1.00-1.30 Cu 0.50-0.80 Cb 0.015-0.045 V 0.02 max N 0.02 max Al 0.050 max |
| P91 | K91560 | 0.08–0.12 | 0.30–0.60 | 0.020 | 0.010 | 0.20–0.50 | 8.00–9.50 | 0.85–1.05 | V 0.18–0.25 |
| N 0.030–0.070 | |||||||||
| Ni 0.40 max | |||||||||
| Al 0.02 max | |||||||||
| Cb 0.06–0.10 | |||||||||
| Ti 0.01 max | |||||||||
| Zr 0.01 max | |||||||||
| P92 | K92460 | 0.07–0.13 | 0.30–0.60 | 0.020 | 0.010 | 0.50 max | 8.50–9.50 | 0.30–0.60 | V 0.15–0.25 N 0.03–0.07 Ni 0.40 max Al 0.02 max Cb 0.04–0.09 W 1.5–2.00 B 0.001–0.006 Ti 0.01 max Zr 0.01 max |
| P122 | K92930 | 0.07–0.14 | 0.70 max | 0.020 | 0.010 | 0.50 max | 10.00–11.50 | 0.25–0.60 | V 0.15–0.30 W 1.50–2.50 Cu 0.30–1.70 Cb 0.04–0.10 B 0.0005–0.005 N 0.040–0.100 Ni 0.50 max Al 0.020 max Ti 0.01 max Zr 0.01 max |
| P911 | K91061 | 0.09–0.13 | 0.30–0.60 | 0.020 max | 0.010 max | 0.10–0.50 | 8.5–9.5 | 0.90–1.10 | V 0.18–0.25 Ni 0.40 max Cb 0.060–0.10 B 0.0003–0.006 N 0.04–0.09 Al 0.02 max W 0.90–1.10 Ti 0.01 max Zr 0.01 max |
A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube Packing A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation.
A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.
Delivery: Within 10-25 days or asap if we have enough stock
Types of Packaging:
- – Bundles (hexagonal)
- – Wooden Boxes
- – Crates (steel/wooden)
- – Special crates for U-Bend tubes with each radius separated
- – Packaging for A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe as per customer’s requirements
Special Features:
- – Each bundle covered with plastic for protection against extreme weather.
- – End of A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe protected by plastic caps.
- – Bundles strapped with plastic strips.
- – Each radius of U-Bend tube separated by a separator.
- – Packaging list (laminated) placed with box/crate.
ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube Sizes Available in Stock with Price
- 1/2″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 3/4″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 1″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 1-1/4″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 1-1/2″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 2″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 2-1/2″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 3″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 3-1/2″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 4″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 5″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 6″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 8″ NB in ThicknessSchedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 10″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 12″ NB in ThicknessSchedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 14″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 16″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 18″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 20″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 22″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 24″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 26″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 28″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 30″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 32″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 34″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
- 36″ NB in Thickness Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS in ASTM A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipe and Tube
Search for Manufacturers Suppliers of ASTM A335 Grade P22 Alloy Steel Pipe ends at Prime Tube Impex, we offer better quality & better price. ASTM A335 Grade P22 Alloy Steel Pipe manufacturer, ASTM A335 Grade P22 Alloy Steel Pipe suppliers, ASTM A335 Grade P22 Alloy Steel Pipe exporter, ASTM A335 Grade P22 Alloy Steel Pipe distributor, ASTM A335 Grade P22 Alloy Steel Pipe stockists, ASTM A335 Grade P22 Alloy Steel Pipe price
Contact Steber Steel today for a competitive quotation…
call : (+91) 22-23824442
e-mail: sales@stebersteel.net