317L Stainless Steel Plate Flanges manufacturer, manufacturer of ASTM A182 F317L Stainless Steel Plate Flanges, ASME B16.5 317L Plate Flanges manufacturer, ANSI #150 Plate Flange F317L

Stainless Steel 317L Plate Flanges manufacturer in India, AISI 317L Forged Plate Flanges, SS 317L Threaded Plate Flanges Dealer, AISI 317L RTJ Plate Flanges, SS 317L Plate Flanges Dealer in Mumbai, ANSI B16.9 Stainless Steel 317L Plate Flanges Distributor, ASTM A182 F317L Screwed Plate Flanges exporter in India

SS 317L Plate Flanges manufacturer, high quality ASME B16.5 A182 F317L Plate Flanges DN15 SCH40S PN16 supplier, ASME B16.5 A182 F317L Plate Flanges DN40 SCH40S PN16 distributor near you, EN1092-1/01/B1 317L Plate Flanges RF DN300 PN16 stockist, ASME B16.5 A182 F317L Plate Flanges 4 Inch SCH40S stockholder, Stainless Steel 317L Plate Flanges DN150 PN1.0 for Sale, EN1092-1 Type 11 317L Plate Flanges DN25 PN40 SCH40S at Best Price, BS 4504 317L Plate Flanges DN50 PN10 suppliers, 317L Plate Flanges 150LB 16 Inch manufacturers

Contents-

317L Stainless Steel Plate Flanges manufacturer

 

 

 

What is 317L Stainless Steel Plate Flanges?

Stainless Steel 317L Flat Flanges are flanges with flat face, so a gasket surface is at the same line with bolting circle face. This type of 317L Stainless Steel Flat flanges is mainly used with casing mating flange or flange fitting.

A Stainless Steel 317L Plate Flanges is a method of connecting pipes, valves, pumps and other equipment to form a piping system in Petro and chemical industry. 317L Stainless Steel Plate Flanges also provides easy access for cleaning, inspection or modification. SS 317L Plate Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal. All types except the A182 Stainless Steel 317L Plate Flanges are provided with a raised flange face. Each ASME SA182 F317L Plate Flanges according to ASME B16.5 has a number of standard dimensions.

Steber Steel is manufacturer of ASTM A182 Stainless Steel 317L Plate Flanges in India. We are ISO 9001 & 14000 certified exporter of all SS 317L Plate Flanges are manufactured in India, with raw materials coming from reputed Mills in India and overseas. We are stockholder and supplier of 317L Stainless Steel Plate Flanges in a wide range sizes, surface treatment, and ASTM standards. UNS S31703 | WNR 1.4438 | Alloy 317L. We offer you DIN spec certified Flanges from rough B16.5 forgings, at a competitive cost.

BS 4504 317L Plate Flanges DN50 PN10 are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for 150# Stainless Steel 317L Plate Flanges, the standard height is 1/16" for ANSI B16.9 Plate Flanges under 400#. For SAE 317L Plate Flanges of 400# and up, the standard AISI 317L Plate Flanges raised face height is 1/4". SUS 317L Plate Flanges in our stock include ANSI B16.5 SS 317L Plate Flanges, ASME B16.47 Series "A" ASTM A182 UNS S31703 Plate Flanges, ASME B16.47 Series "B" ASME SA182 UNS S31703 Plate Flanges and Pressure Vessel 317L Plate Flanges. We offer you DIN spec certified Flanges from rough B16.5 forgings, at a competitive cost.

We also carry a line of SS flanges and gaskets kits in a variety of materials including rubber, non-asbestos and Teflon.

317L Stainless Steel Plate Flanges Specification

Product Name: 317L Stainless Steel Plate Flanges
We accept all small/large quantity orders.

INOX 317L DIN2576 A182 F317L Plate Flanges PN10 DN250 manufacturer, ASME B16.5 A182 F317L Plate Flanges DN500 CL150 supplier, A182 UNS S31703 Plate Flanges exporter, ANSI B16.5, ANSI B16.47, B16.48, BS4504, BS 10, EN-1092 SS 317L Plate Flanges stockist, EN 1.4438 Plate Flanges distributor, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Stainless Steel 317L Plate Flanges dealer, Stainless Steel 317L ASME B16.5 Plate Flanges Stockist in India

  • Production Standards: ANSI B 16.5; MSS SP 44; EN 1092-1; ISO 7005-1. PN6, PN10, PN16, PN25, PN40, PN64, PN100
  • 317L Grade: SUPER AUSTENITIC 317L Plate Flanges/ SS 317L Plate Flanges/ WNR 1.4438 Plate Flanges/ UNS S31703 Plate Flanges/ AISI 317L Plate Flanges/ SUS 317L Plate Flanges/ INOX 317L Plate Flanges/ Alloy 317L Plate Flanges/ SS317L Plate Flanges/ Stainless Steel SUS 317L Plate Flanges/ ANSI 317L Plate Flanges/ Steel 317L Plate Flanges/ Stainless Steel UNS S31703 Plate Flanges/ SAE 317L Plate Flanges/ ASME SA182 SS 317L Plate Flanges/ SS 2367 / Stainless Steel DIN 1.4438 / Type 317L / X 2 CrNiMo 18 16 / SS317L
  • Typical manufacturing specifications: ASTM A182 F317L, ASTM A182 F317L, ASME SA182 F317L, ASME SA182 F317L, SAE J405, MSS SP-43, ASTM B16.9
  • Origin: European Origin, Indian Origin, US Origin, Korean Origin, Sweden Origin, Ukraine Origin, Japanese Origin Materials
  • Top 10 Manufacturer of 317L Plate Flanges: Raccortubi S.p.A. Plate Flanges, Italy, Erne Fittings Plate Flanges, Austria, Melesi Plate Flanges, Italy, Mega Plate Flanges, Italy, Ulma Plate Flanges, Spain, TecnoForge Plate Flanges, Italy, BENKAN Corporation Plate Flanges, Japan, BKL- Thai Benkan Plate Flanges, Thailand, Lame S.r.l. Plate Flanges, Italy, Metal far Plate Flanges, Italy, Steber Steel, India
  • Delivery: 15-20 days
  • Application: Research, science, and industry for sterile and aseptic process engineering.
  • Material: DIN 1.4305, DIN 1.4301, DIN 1.4307, DIN 1.4948, DIN 1.4401, DIN 1.4404, DIN 1.4919, DIN 1.4571, DIN 1.4541, DIN 1.4878, DIN 1.4460, DIN 1.4550, DIN 1.4961, DIN 1.4840, DIN 1.4845, DIN 1.4449, DIN 1.4438, DIN 1.4841, DIN 1.4006, DIN 1.4005, DIN 1.4021, DIN 1.4016, DIN 1.4104, DIN 1.4057, DIN 1.4125, DIN 1.4762, DIN 1.4742, DIN 1.4438, DIN 1.4542, DIN 1.4545, DIN 1.4534, DIN 1.4980, DIN 1.3964
  • These Plate Flanges are recognized by ASME Pipe Codes such as ASME B31.1 Power Piping, and ASME B31.3 Process Piping

ASME/ ANSI, EN, DIN, AFNOR, AWWA, GOST, BS, JIS, AS, MSS, SA, UNI SS 317L Plate Flanges

S 317L Plate Flanges Manufacturing Standards ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, BS EN1092-1 PN10/16/25/40 Type 01, 05, 11, 12, & 13.
Specifications: ASTM A182 / ASME SA182, ASTM A182 / ASME SA182
Standard: ANSI Plate Flanges, ASME Plate Flanges, BS Plate Flanges, DIN Plate Flanges, EN Plate Flanges, etc.
Size Range 1/2″ (15 NB) to 48″ (1200NB), ASME B16.47 Plate Flanges size range: 26″ to 60″
Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Plate Flanges Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Value Added Service Polish (Electro & Commercial)
Heat Treatment
Annealed & Pickled
Sand Blasting
Machining Etc.
AWWA Plate Flanges ratings only at atmospheric temperature
ANSI Plate Flanges ratings installations from -20°F to 1500°F
ANSI Class Plate Flanges 150 to 2500 Size: 1/2"-24"
AWWA Class Plate Flanges classes B, D, E, F Size: 3"-144"
AWWA Plate Flanges AWWA Standard for Steel Pipe Flanges for Waterworks Service-Sizes 4 In. Through 144 In.
ANSI B16.5 Plate Flanges Pipe Flanges and Flanged Fittings
ANSI B16.5 Plate Flanges pressure classes 150, 300, 400, 600, 900, 1500 and 2500 for ASME B16.5
ANSI B16.47 Plate Flanges pressure classes 75, 150, 300, 400, 600, 900 for ASME B16.47
Specialized in 317L STAINLESS STEEL SORF, SOFF, BLRF, BLFF, WNRF, WNFF, SWRF, SWFF, Threaded RF, Threaded FF & LJ

Sealing surface:		 FF ,RF, LJ, FM , R.T.J , R.J and so on
Application Petroleum, Chemical, Power, Gas, Water, Linepipe, Heat Exchanger, Shipbuilding, Construction, Etc

317L Stainless Steel Plate Flanges Dimensions

BS4504 PLATE FLANGE Dimensions

317L Stainless Steel Plate Flanges Dimensions

317L Stainless Steel Plate Flanges Packaging & Shipping:

317L Stainless Steel Plate Flanges Manufacturer

317L Stainless Steel Plate Flanges Manufacturer

SS 317L Plate Flanges Packing: We focus on every procedure to assure quality, the package we usually take is pack WNR 1.4438 Plate Flanges with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation.

Steber Steel offers just about everything to meet your UNS S31703 Plate Flanges pack requirements. Lot of emphasis is placed on the packing and packaging. The AISI 317L Plate Flanges are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.

317L Stainless Steel Plate Flanges Marking: All SUS 317L Plate Flanges are marked with size and specification. Or as per customer’s requirement;

So, besides the fact that we can arrange freight transportation for you, we can before that:

  • Specifically mark parts or packages;
  • Provide for a special packing according to what is required by the shipping method or by you.

We mark the INOX 317L Plate Flanges as needed with the most suitable marking technique.

When packaging and packing, our experienced warehouse staff systematically takes the greatest precautions for your Alloy 317L Plate Flanges to be optimally protected during transportation. We pack the SS317L Plate Flanges according to the appropriate method: strapped pallet, wooden crate, overseas packing.

Markings on the Stainless Steel 317L, UNS S31703,  WNR 1.4438 Plate Flanges

The full identification of the Plate Flanges should be continuously marked down its whole length, including:

  1. Nominal Plate Flanges Size of 317L Plate Flanges
  2. Class of SS 317L Plate Flanges
  3. Specification of SS 317L Plate Flanges
  4. Grade of SS 317L Plate Flanges
  5. Heat Number for of SS 317L Plate Flanges
  6. Manufacturer’s Name or Symbol of 317L SS Plate Flanges
  7. Customized marking available for SS 317L Plate Flanges

CONTACT US FOR A QUICK QUOTE, Get 317L Stainless Steel Elbow price list, send an email to us at sales@stebersteel.net, stebersteel@gmail.com

317L Stainless Steel Plate Flanges Weight Chart

ANSI B16.5 -½ “-24” SS 317L Forged Plate Flanges

CLASS Nominal Pipe Size  Slip On  Threaded Socket Weld Lap Joint Blind Weld Neck
150 lb ½  1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
1¼ 3 3 3 3 3 3
1½  3 3 3 3 4 4
2    5 5 5 5 5 6
2½  8 8 8 8 7 10
3    9 9 9 9 9 11.5
3½  11 12 11 11 13 12
4    13 13 13 13 17 16.5
5    15 15 15 15 20 21
6    19 19 19 19 27 26
8    30 30 30 30 47 42
10    43 43 43 43 70 54
12    64 64 64 64 123 88
14    90 90 90 105 140 114
16    106 98 98 140 180 140
18    130 130 130 160 220 165
20    165 165 165 195 285 197
22    185 185 185 245 355 225
24    220 220 220 275 430 268
CLASS Nominal Pipe Size  Slip On  Threaded Socket Weld Lap Joint Blind Weld Neck
300 lb ½ 2 2 3 2 2 2
¾ 3 3 3 3 3 3
1    3 3 3 3 4 4
1¼ 4.5 4.5 4 4.5 6 5
1½  6.5 6.5 6 6.5 7 7
2    7 7 7 7 8 9
2½  10 10 10 10 12 12
3    13 14 13 14.5 16 18
3½  17 17 17 17 21 20
4    23.5 24 22 24 28 26.5
5    29 31 28 28 37 36
6    39 39 39 39 50 45
8 58 58 58 58 81 69
10 81 81 81 91 124 100
12 115 115 115 140 185 142
14 165 165 165 190 250 206
16 210 220 190 234 315 250
18 253 280 250 305 414 320
20 315 325 315 375 515 400
22 370 370 370 435 640 465
24 490 490 475 550 800 580
CLASS Nominal Pipe Size  Slip On  Threaded Socket Weld Lap Joint Blind Weld Neck
400 lb ½  2 2 2 2 2 3
¾ 3 3 3 3 3 3.5
1 3.5 3.5 3.5 3.5 4 4
1¼ 4.5 4.5 4.5 4.5 6 4.5
1½  6.5 6.5 6.5 6.5 8 8
2    8 8 8 8 10 10
2½  12 12 12 11 15 14
3    15 15 15 14 20 18
3½  21 21 21 20 29 26
4    26 26 26 25 33 35
5    31 31 31 29 44 43
6    44 44 44 42 61 57
8    67 67 67 64 100 89
10    91 91 91 110 155 125
12    130 130 130 152 226 175
14    191 191 191 210 310 233
16    253 253 253 280 398 295
18    310 310 310 345 502 360
20    378 378 378 420 621 445
22    405 405 405 455 720 505
24    539 539 539 615 936 640
CLASS Nominal Pipe Size  Slip On  Threaded Socket Weld Lap Joint Blind Weld Neck
600 lb ½ 2 2 2 2 3 3
¾ 3 3 3 3 4 4
1    4 4 4 4 4 4
1¼ 5 5 5 5 6 6
1½  7 7 7 7 8 8
2    9 9 9 9 10 12
2½  13 13 13 12 15 18
3    16 16 16 15 20 23
3½  21 21 21 20 29 26
4    37 37 37 36 41 42
5    63 63 63 63 68 68
6    80 80 80 78 86 81
8 115 15 15 112 140 120
10 177 177 177 195 231 190
12 215 215 215 240 295 226
14 259 259 259 290 378 347
16 366 366 366 400 527 481
18 476 476 476 469 665 555
20 612 612 612 604 855 690
22 590 590 590 670 1000 720
24 876 876 876 866 1250 977
CLASS Nominal Pipe Size  Slip On  Threaded Socket Weld Lap Joint Blind Weld Neck
900 lb ½  6 6 6 6 4 7
¾ 6 6 6 6 6 7
1 7.5 7.5 7.5 7.5 9 8.5
1¼ 10 10 10 10 10 10
1½  14 14 14 14 14 14
2    22 22 22 21 25 24
2½  31 31 31 25 32 31
3    36 36 36 29 35 36
4    53 53 53 51 54 53
5    83 83 83 81 87 86
6    110 110 110 105 115 110
8    172 172 172 190 200 187
10    245 245 245 277 290 268
12    326 326 326 371 415 372
14    400 400 400 415 520 562
16    459 459 459 488 619 685
18    647 647 647 670 880 924
20    792 792 792 868 1107 1164
24    1480 1480 1480 1659 2099 2107
CLASS Nominal Pipe Size  Slip On  Threaded Socket Weld Lap Joint Blind Weld Neck
1500 lb ½ 6 6 6 6 4 7
¾ 6 6 6 6 6 7
1    8 8 8 8 9 9
1¼ 10 10 10 10 10 10
1½  14 14 14 14 14 14
2    25 25 25 25 25 25
2½  36 36 36 35 35 36
3    48 48 48 47 48 48
4    73 73 73 75 73 73
5    132 132 132 140 140 132
6    165 165 165 170 160 165
8    260 260 260 286 302 275
10 436 436 436 485 510 455
12 667 667 667 749 775 690
14 940 940 940 890 975 940
16 1250 1250 1250 1250 1300 1250
18 1625 1625 1625 1475 1750 1625
20 2050 2050 2050 1775 2225 2050
24 2825 2825 2825 2825 3625 3325
CLASS Nominal Pipe Size  Slip On  Threaded Socket Weld Lap Joint Blind Weld Neck
2500 lb ½  …. 7 …. 7 7 8
¾ …. 9 …. 8 10 9
1 …. 12 …. 12 12 13
1¼ …. 18 …. 17 18 20
1½  …. 25 …. 24 25 28
2    …. 38 …. 37 39 42
2½  …. 55 …. 53 56 52
3    …. 83 …. 80 86 94
4    …. 127 …. 122 133 146
5    …. 210 …. 204 223 244
6    …. 323 …. 314 345 378
8    …. 485 …. 471 533 576
10    …. 925 …. 897 1025 1068
12    …. 1300 …. 1262 1464 1608

SS 317L Plate Flanges Standards / Pressure Class

ASME/ANSI B 16.5 Plate Flanges
PRESSURE CLASS Class 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Plate Flanges
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

What are PN10, PN16 and PN25 Standards Plate Flanges

PN10, PN16, PN25 and PN40 specify both pressure class in bars of pressure, and metric Plate Flanges dimensions (such as bolt circle diameter, hole size, bolt size etc) according to international flange standards such as ISO 7005-1 or DIN 2501 that use the metric system of measurements. Plate Flanges produced to ANSI, AWWA, ASA, or old British standards that are dimensioned in inches will not mate up with metric flanges in general. It is good practice when specifying a PN flange standard to indicate the actual working pressure since it is a common occurrence that a specific PN, say PN16, flange drilling is required on a fitting or valve to match adjacent flanges, but the pressure requirement is less than PN16.

British Standard Plate Flanges

BS10 Plate Flanges
  • Table D
  • Table E
  • Table F
  • Table G
  • Table H
  • Table J
  • Table K

 
  • Table D is the most popular for applications with water.
  • All dimensions are specified in inches.

Australian Standard Plate Flanges

AS2129 Plate Flanges
  • Table C
  • Table D
  • Table E
  • Table F
  • Table G
  • Table H
  • Table J

 
  • These Plate Flanges are equivalent to the BS10 Plate Flanges, except that all dimensions are specified in mm.
  • In some sizes, bolt holes are slightly larger to give better clearance.

American National Standards Institute Plate Flanges

ANSI Plate Flanges
  • ANSI 125
  • ANSI 150
  • ANSI 300
  • ANSI 600
  • ANSI 900
  • ANSI 1500

 
  • Higher numbers denote higher pressures.
  • Sometimes people use the word ‘Class’ instead of ANSI. e.g. an ANSI 150 Plate Flanges might be called a ‘Class 150’
  • All dimensions are specified in inches.

British Standard Plate Flanges

BS4504 Plate Flanges
  • BS4504-6
  • BS4504-10
  • BS4504-16
  • BS4504-25
  • BS4504-40
  • BS4504-64
  • BS4504-100
  • PN6
  • PN10
  • PN16
  • PN25
  • PN40
  • PN64
  • PN100
  • Engineers use the prefix PN (Pressure Nominale). e.g. a BA4504-16 flange will commonly be referred to as a PN16
  • Generally, a PN16 flange is designed to withstand pressures up to 16 bar.
  • All dimensions are specified in mm.

½" A182 F317L Plate Flanges DN15
¾" A182 F317L Plate Flanges DN20
1" A182 F317L Plate Flanges DN25
1¼" A182 F317L Plate Flanges DN32
1½"  Plate Flanges DN40
2" A182 F317L Plate Flanges DN50
2½" A182 F317L Plate Flanges DN65
3" A182 F317L Plate Flanges DN80
4" A182 F317L Plate Flanges DN100
5" A182 F317L Plate Flanges DN125
6" A182 F317L Plate Flanges DN150
8" A182 F317L Plate Flanges DN200
10" A182 F317L Plate Flanges DN250
12" A182 F317L Plate Flanges DN300
14" A182 F317L Plate Flanges DN350
15" A182 F317L Plate Flanges DN375
16" A182 F317L Plate Flanges DN400
18" A182 F317L Plate Flanges DN450
20" A182 F317L Plate Flanges DN500
24" A182 F317L Plate Flanges DN600

SS 317L Other Products Stock List

317L Stainless Steel Plate Flanges Chemical Composition

Chemical Composition, %

Ni

Cr

Mo

Mn

Si

11.0 – 15.0

18.0 – 20.0

3.0 – 4.0

2.0 Max

.75 Max

C

N

S

P

Fe

0.03 Max

0.1 Max

0.03 Max

0.045 Max

Balance

317L Stainless Steel Plate Flanges Mechanical Properties

Ultimate Tensile Strength, ksi Minimum

.2% Yield Strength, ksi Minimum

 Elongation Percent

Hardness Max.

75

30

35

217 Brinell

Physical Properties of 317L Stainless Steel Plate Flanges

Density: 0.285 lb/inch3 
Melting Point: 2540 – 2630°F 
Poisson’s Ratio: 0.3 
Electrical Resistivity: 475 Ohm-circ mil/ft

Temperature, °F 70 212 392 572
Coefficient* of Thermal Expansion, in/in°F x 10-6 – 9.2 10.1 10.8
Thermal Conductivity
Btu • ft/ft2 • hr • °F		 7.8 – – –
Modulus of Elasticity Dynamic, psi x 106 29 – – –

* 70°F to indicated temperature.

317L Plate Flanges Specifications

Grade

UNS No

Old British

Euronorm (DIN)

BS

WERKSTOFF NR.

DIN Name

Type 317L

S31703

317 S 12

1.4438

X2CrNiMo18-15-4
Normen KS AFNOR NAS Japanese JIS
  STS317L/ D3693/G3601 Z 2 CND 19-15 NAS 317L SUS 317L

Standards

HDIN / EN US-Standard AFNOR UNI JIS
X2CrNiMo18-15-4
X2CrNiMo1864		 AISI 317L 
UNS S31703		 X2CrNiMo1815 SUS317L
SUS317LFB
SUS317LTB
SUS317LTP
SUSF317L
SUSY317L
DIN X2CrNiMo18-15-4, DIN X2CrNiMo1864, ANFOR Z2CND19-15-04, ANFOR Z3CND19-15-04, UNI X2CrNiMo1815, JIS SUS317L, JIS SUS317LFB, JIS SUS317LTB, JIS SUS317LTP, JIS SUSF317L, JIS SUSY317L, AISI 317L, UNS S31703

317L Stainless Steel Plate Flanges Possible Alternative Grades

317L Stainless Steel Plate Flanges Equivalent Grades
British German
AISI UNS Swedish Japanese
ASTM No. SS JIS
Type Bs Eu W.No. DIN
317 S31700 317S16 – 1.4449 X 5 CrNiMo 17 13 – -SUS 317
317L S31703 317S12 – 1.4438 X 2 CrNiMo 18 16 2367 SUS 317L

SUS 317L Plate Flanges Heat Resistance

Significantly better corrosion resistance that T-316 in the same environments. Good oxidation resistance in continuous service to 925°C and in intermittent service to 879°C.

AISI 317L Plate Flanges Heat Treatment

AISI 317L stainless steel Plate Flanges is non-magnetic in the annealed condition and is non-hardenable by heat treatment. Machinability is 39% – 65 surface feet per minute.

SS 317L Plate Flanges Fabrication

Alloy 317L stainless steel Plate Flanges can be easily welded and processed by standard shop fabrication practices.

317L Stainless Steel Plate Flanges producing through Cold forming

Shearing, stamping, heading and drawing can be successfully performed . To remove internal stresses, a post-work annealing is recommended.

Stainless Steel 317L Plate Flanges Machining

Low speeds and constant feeds will minimize this alloy’s tendency to work harden. Tougher than 304 stainless steel Plate Flanges with a long stringy chip, the use of chip breakers is recommended.

317L Plate Flanges Welding

317L stainless steel Plate Flanges can be readily welded by most standard processes. A post weld heat treatment is not necessary. 317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.

Alloy 317L Plate Flanges Hot Forming

317L stainless steel Plate Flanges are non-magnetic in the annealed condition and is non-hardenable by heat treatment. Machinability is 39% – 65 surface feet per minute.

317L Stainless Steel Plate Flanges Applications & Usage:

Some of the major applications of grade stainless steel 317L Plate Flanges include:

  • SAE 317L Plate Flanges for Air Pollution Control- scrubbers for coal-fired power plants
  • UNS S31703 Plate Flanges mainly used for Seawater cooling devices
  • SS 317L Plate Flanges can be use in Wiring in electrostatic precipitators
  • EN 1.4438 Plate Flanges are used in Oil refinery components
  • AISI 317L Plate Flanges also useful for Gas scrubbing plants
  • SUS 317L Plate Flanges are commonly used by Pulp and paper processing industries
  • INOX 317L Plate Flanges are also suitable for Acetic, phosphoric and sulphuric acid processing plants
  • Alloy 317L Plate Flanges available for Oil and Gas Production- offshore process equipment
  • Offshore, sea water technology, chemical industry, good stability against reducing acids of medium strength like sulphuric acid and phosphoric acid and various chloric media, refinery, paper industry, pulp industry

MSS, API, AWWA, ANSI AND CSA STANDARDS

ANSI, MSS and API standards govern flange dimensions and tolerances. ASME/ANSI B16.5, titled “ Steel Pipe Flanges and Flanged Fittings”, is the basic standard. It covers forged steel flanges, sizes NPS 1/2 (DN 15) through NPS 24 (DN 600). CSA standard CAN3-Z245 12-M96 covers the manufacture, dimensions, tolerances and material requirements for pipe line flanges. ASME/ANSI B16.36 covers Orifice flanges. The following MSS, API and AWWA standards are written to supplement B16.5:

  • MSS SP-6: Flange facings
  • MSS SP-9: Spot facing for bronze, iron and steel flanges
  • MSS SP-25: Marking of flanges
  • MSS SP-39: Bolts and nuts for flanges
  • API6A: Wellhead equipment
  • AWWA C207: Hub flanges

The following codes are not flange specifications, but they influences the manufacture of forged steel flanges:

  • ASME: Boiler and Pressure Vessel Code
  • ASME/ANSI B31.1: Power Piping
  • ASME/ANSI B31.3: Petroleum and refinery piping
  • ASME/ANSI B31.4: Liquid petroleum transportation piping systems
  • ASME/ANSI B31.5: Refrigeration piping
  • ASME/ANSI B31.8: Gas transmission and distribution piping systems
  • ANSI/ASME B36.10M: Standard for wrought steel pipe
  • ANSI/ASME B36.19M: Standard for stainless steel pipe
  • ANSI/ASME B16.47: Large diameter pipe line flanges NPS 22 (DN 550) and NPS 26 (DN 650) through NPS 36 (DN900)

Export Destinations for 317L Stainless Steel Plate Flanges

Steber Steel is a leading exporter and distributor of stainless steel 317L Plate Flanges in India and international markets such as Malaysia, Iran, Germany, UK, Canada, UAE, Bahrain, Indonesia, Mexico, Chile, Brazil, Peru, Nigeria, Kuwait, Jordan, Thailand (Bangkok), Saudi Arabia, Venezuela, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan. A widest range of SS 317L Plate Flanges ready stock available in Middle East countries including Bahrain, Iraq, Israel, Jordan, Cyprus, Egypt, Iran, Kuwait, Lebanon, Oman, Saudi Arabia, Syria, Turkey, United Arab Emirates, Palestine, Qatar and Yemen. Get best deals from distributor of 317L Stainless Steel Plate Flanges.

Domestic Supply Destinations for Stainless Steel 317L Plate Flanges and SS 317L Threaded Plate Flanges

Our SS 317L products are supplied to all major Industrial areas and cities in India such as Mumbai, Ahmedabad, Chennai, Bangalore, Hyderabad, Assam, Siliguri, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Delhi, Vadodra, Nashik, Thoothukudi, Rajkot, Aurangabad, Salem, Bhilai, Bhiwandi, Bikaner, Jamshedpur, Warangal, Nellore, Agartala, Ranchi, Coimbatore, Raipur, Mysore, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Bhubaneswar and Faridabad. For any location in your country you can find here trader of Stainless Steel 317L Plate Flanges in India, If your requirement is urgent we can offer a priority shipping service, but also if time is not so critical we can offer more cost-effective options to ensure you get the best value for money.

Other Plate Flanges Related to 317L Stainless Steel Plate Flanges



  • 317L Plate Flanges manufacturer
  • Stainless Steel 317L Plate Flanges
  • Manufacturer of 317L Stainless Steel Plate Flanges
  • Manufacturer of 317L Stainless Plate Flanges
  • SS 317L Plate Flanges manufacturer
  • Alloy 317L Stainless Steel Plate Flanges
  • Manufacturer of AISI 317L Plate Flanges
  • Manufacturer of SUS 317L Plate Flanges
  • INOX 317L Plate Flanges manufacturer
  • Manufacturer of Alloy 317L Plate Flanges
  • ASTM A182 Stainless Steel 317L Plate Flanges
  • WNR 1.4438 Plate Flanges manufacturer
  • UNS S31703 Plate Flanges
  • Super Austenitic 317L Plate Flanges
  • Grade 317L Stainless Steel Plate Flanges
  • Stainless Steel Plate Flanges Grade 317L
  • SAE 317L Plate Flanges manufacturer
  • ASME SA182 SS 317L Plate Flanges
  • SS DIN 1.4438 Plate Flanges manufacturer
  • Manufacturer of SS317L Plate Flanges
  • Manufacturer of Stainless Steel SUS 317L Plate Flanges
  • Stainless Steel DIN 1.4438 Plate Flanges
  • ANSI 317L Plate Flanges manufacturer
  • Manufacturer of Steel 317L Plate Flanges
  • Type 317L Plate Flanges manufacturer
  • Manufacturer of Stainless Steel UNS S31703 Plate Flanges
  • ASTM A182 F 317L Plate Flanges
  • ASME SA182 Plate Flanges manufacturer
  • ASTM A182 UNS S31703 Plate Flanges
  • ASME SA182 UNS S31703 Plate Flanges
  • ANSI B16.5 SS 317L Plate Flanges
  • ASTM A182 F317L Plate Flanges
  • ASTM A182 F317L Plate Flanges manufacturer
  • 317L Stainless Steel Forged Plate Flanges
  • 317L Stainless Steel Threaded Plate Flanges
  • 317L Stainless Steel Screwed Plate Flanges
  • ASTM A182 F 317L 36" A182 F317L Plate Flanges
  • ANSI B16.9 Plate Flanges manufacturer
  • Manufacturer of BS10 Table D Plate Flanges
  • Manufacturer of Table E Plate Flanges
  • DIN Standard Plate Flanges manufacturer
  • Manufacturer of SS F317L Plate Flanges
  • ASME SA182 Stainless Steel 317L Class 300 Plate Flanges
  • 317L Stainless Steel Class 600 Plate Flanges
  • SS 317L EN 1092-1 Plate Flanges
  • SS 317L Industrial Plate Flanges manufacturer
  • Manufacturer of 150# Stainless Steel 317L Plate Flanges
  • 1500# Stainless Steel 317L Plate Flanges
  • Manufacturer of 2500# Stainless Steel 317L Plate Flanges
  • ASTM A182 Stainless Steel Plate Flanges
  • Stainless Steel 317L Flate Face Plate Flanges
  • 317L Stainless Steel Raised Face Plate Flanges
  • AWWA standard Stainless Steel Plate Flanges
  • PN10 Stainless Steel Plate Flanges manufacturer
  • Manufacturer of PN16 Stainless Steel Plate Flanges
  • PN25 Stainless Steel Plate Flanges manufacturer
  • ASME B16.5 A182 F317L Plate Flanges DN250 SCH100
  • DIN2576 A182 F317L Plate Flanges PN10 DN25
  • DIN2576 A182 F317L Plate Flanges PN10 DN250
  • ASME B16.5 A182 F317L Plate Flanges DN500 CL150
  • ASME B16.5 A182 F317L Plate Flanges DN25 SCH40S PN16
  • ASME B16.5 A182 F317L Plate Flanges DN15 SCH40S PN16
  • ASME B16.5 F317L Plate Flanges 4 Inch 300LBS
  • A182 Stainless Steel 317L Plate Flanges 1500LB 8 Inch
  • ANSI B16.5 Stainless Steel 317L Forged Plate Flanges 250 Lbs
  • Manufacturer of ASTM A182 SS 317L Plate Flanges
  • EN1092-1/05/B1 317L Plate Flange RF 1 INCH PN40
  • EN1092-1/05/B1 317L Plate Flange RF 2 INCH PN40
  • EN1092-1/05/B1 317L Plate Flange RF 1/2 INCH PN40
  • Grade F317L Stainless Steel Plate Flange manufacturer
  • Manufacturer of ANSI #300 Plate Flange F317L
  • Manufacturer of ANSI #600 Plate Flange F317L
  • Manufacturer of ANSI #1500 Plate Flange F317L
  • ANSI #900 Plate Flange F317L
  • Manufacturer of ANSI #2500 Plate Flange F317L
  • ASME B16.5 A182 F317L Plate Flanges DN40 SCH40S PN16
  • EN1092-1/01/B1 317L Plate Flanges RF DN300 PN16
  • ASME B16.5 A182 F317L Plate Flanges 4 Inch SCH40S
  • Manufacturer of Stainless Steel 317L Plate Flanges DN150 PN1.0
  • EN1092-1 Type 11 317L Plate Flanges DN25 PN40 SCH40S
  • BS 4504 317L Plate Flanges DN50 PN10
  • Manufacturer of 317L Plate Flanges 150LB 16 Inch
  • ASME B16.5 ASTM A182 F317L Plate Flanges CL150 DN500
  • ANSI B16.5 ASTM A182 Plate Flange DN300 CLASS300
  • ASTM A182 F317L Plate Flange 600NB 300LB
  • ASME B16.5 A182 F317L Plate Flange DN250 SCH100
  • DIN2576 A182 F317L Plate Flange PN10 DN25
  • ASME B16.5 A182 F317L Plate Flange DN500 CL150
  • ASME B16.5 A182 F317L Plate Flange DN25 SCH40S PN16
  • ASME B16.5 A182 F317L Plate Flange DN15 SCH40S PN16
  • ASME B16.5 A182 F317L Plate Flange DN40 SCH40S PN16
  • EN1092-1/01/B1 317L Plate Flange RF DN300 PN16
  • ASME B16.5 A182 F317L Plate Flange 4 Inch SCH40S
  • Stainless Steel 317L Plate Flange Sight Glass DN150 PN1.0
  • EN1092-1 Type 11 317L Plate Flange DN25 PN40 SCH40S
  • BS 4504 317L Plate Flange DN50 PN10 supplier
  • SS 317L Plate Flanges supplier
  • Manufacturer of 317L WNRF Flange 150LB 16 Inch
  • ASME B16.5 ASTM A182 F317L Plate Flange CL150 DN500
  • ASME B16.5 F317L Plate Flange 4 Inch 300LBS
  • A182 Stainless Steel 317L Plate Flange 1500LB 8 Inch
  • ANSI B16.5 Stainless Steel 317L Forged Plate Flange 250 Lbs
  • 317L Plate Flange Bolted Weld-On supplier
  • Manufacturer of Stainless Steel 317L Plate Flange
  • Manufacturer of SS 317L Plate Flange
  • 317L Stainless Steel Plate Flange supplier
  • 317L SS Plate Flange supplier
  • Stainless Steel 317L Plate Flanges Manufacturers
  • SS UNS S31703 Plate Flanges
  • Stainless Steel 317L Plate Flanges
  • Stainless Steel DIN 1.4438 Plate Flanges
  • 150# Stainless Steel 317L Plate Flange
  • 300# Stainless Steel 317L Plate Flanges supplier
  • 600# Stainless Steel 317L Plate Flanges
  • 1500# Stainless Steel 317L Plate Flanges
  • 2500# Stainless Steel 317L Plate Flanges
  • ASTM A182 F317L Stainless Steel Plate Flange Flange
  • SS 317L Plate Flange Dealer
  • SS 317L Threaded Plate Flange supplier
  • ASTM A182 317L Stainless Steel Plate Flange Stockist
  • Stainless Steel 317L Ring Type Joint Plate Flange
  • ASME SA182 SS 317L Plate Flanges
  • Manufacturer of SS 317L Screwed Plate Flanges
  • SS 317L Plate Flange Price
  • SS 317L Plate Flanges Price List
  • SS 317L Plate Flanges Dimensions
  • ANSI B16.5 SS 317L Plate Flanges
  • ASME B16.47 Plate Flanges
  • 317L SAE J518 Plate Flange supplier
  • Stainless Steel 317L Plate Flange
  • 317L Stainless Steel NPTF Thread Plate Flange
  • 317L Stainless Steel BSPP Thread Plate Flange
  • 317L Stainless Steel Socket Weld Plate Flange
  • Alloy 317L Stainless Steel Plate Flange Large Diameter Flanges
  • Alloy 317L Stainless Steel RTJ Plate Flanges
  • AISI 317L Forged Plate Flanges supplier
  • Manufacturer of AISI 317L Plate Flange ANSI B16 5
  • ASME B16.5 SS 317L Plate Flange
  • ASME B16.5 SS 317L Threaded RF Plate Flange
  • ASME B16.5 SS 317L Threaded FF Plate Flange
  • ASME B16.5 SS 317L Threaded LJ Plate Flange
  • ANSI B16.5 ASTM A182 317L Plate Flange RTJ 8 INCH SCH80 CL900
  • ANSI B16.5 ASTM A182 317L Plate Flange RTJ 2 INCH SCH80 CL900

317L Plate Flanges Price

India’s leading manufacturer & supplier of Stainless Steel 317L Plate Flanges. Widest stock of 317L Plate Flanges in India enable us for prompt delivery to near by countries like Dubai-UAE, Kuwait, Qatar, Saudi Arabia, Turkey, Israel, Iraq, Iran, Oman, Bahrain, Nigeria, Kenya, South & West Africa, Indonesia, Malaysia, Singapore, Thailand & Philippines in any emergency. Supplier & distributor of Alloy 317L Plate Flanges globally in any size & schedule. We have a large inventory 317L Plate Flanges, UNS S31703 SS 317L screwed Plate Flanges, WNR 1.4438 SS Grade WP317L Plate Flanges, manufacturer of ASME B16.5 ASTM A182 F317L Plate Flanges CL150 DN500, ASME B16.5 F317L Plate Flanges 4 Inch 300LBS dealer, Distributor of A182 Stainless Steel 317L Plate Flanges 1500LB 8 Inch, supplier of ANSI B16.5 Stainless Steel 317L Forged Plate Flanges 250 Lbs, 317L Stainless Steel 36" A182 F317L Plate Flanges exporter in India, ASME B16.47 SS 317L Plate Flanges Stockist, DIN 1.4438 Plate Flanges Wholesaler, ASME B16.5 A182 F317L Plate Flanges DN250 SCH100 Stockholder, DIN2576 A182 F317L Plate Flanges PN10 DN25, ASME B16.5 A182 F317L Plate Flanges DN25 SCH40S PN16

Distributor, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM A182 F317L Stainless Steel 317L Plate Flanges