317L Stainless Steel Lap Joint Flanges manufacturer, manufacturer of ASTM A182 F317L Stainless Steel Lap Joint Flanges, ASME B16.5 317L Lap Joint Flanges manufacturer, ANSI #150 SOLJ F317L

Stainless Steel 317L Lap Joint Flanges manufacturer in India, AISI 317L Forged Lap Joint Flanges, SS 317L Threaded Lap Joint Flanges Dealer, AISI 317L RTJ Lap Joint Flanges, SS 317L Lap Joint Flanges Dealer in Mumbai, ANSI B16.9 Stainless Steel 317L Lap Joint Flanges Distributor, ASTM A182 F317L Screwed Lap Joint Flanges exporter in India

SS 317L Lap Joint Flanges manufacturer, high quality ASME B16.5 A182 F317L Lap Joint Flanges DN15 SCH40S PN16 supplier, ASME B16.5 A182 F317L Lap Joint Flanges DN40 SCH40S PN16 distributor near you, EN1092-1/01/B1 317L Lap Joint Flanges RF DN300 PN16 stockist, ASME B16.5 A182 F317L Lap Joint Flanges 4 Inch SCH40S stockholder, Stainless Steel 317L Lap Joint Flanges DN150 PN1.0 for Sale, EN1092-1 Type 11 317L Lap Joint Flanges DN25 PN40 SCH40S at Best Price, BS 4504 317L Lap Joint Flanges DN50 PN10 suppliers, 317L Lap Joint Flanges 150LB 16 Inch manufacturers

What is 317L Stainless Steel Lap Joint Flanges?

Stainless Steel 317L Lap Joint Flanges are used with a corresponding stub-end that “inserts” in the inside of the flange. A pipe is usually welded to the Stub End and 317L Stainless Steel Lap Joint pipe flange is free to rotate around the stub end. The benefit of this is that there will not be any issues with bolt hole alignment.

A Stainless Steel 317L Lap Joint Flanges is a method of connecting pipes, valves, pumps and other equipment to form a piping system in Petro and chemical industry. 317L Stainless Steel Lap Joint Flanges also provides easy access for cleaning, inspection or modification. SS 317L Lap Joint Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal. All types except the A182 Stainless Steel 317L Lap Joint Flanges are provided with a raised flange face. Each ASME SA182 F317L Lap Joint Flanges according to ASME B16.5 has a number of standard dimensions.

Steber Steel is manufacturer of ASTM A182 Stainless Steel 317L Lap Joint Flanges in India. We are ISO 9001 & 14000 certified exporter of all SS 317L Lap Joint Flanges are manufactured in India, with raw materials coming from reputed Mills in India and overseas. We are stockholder and supplier of 317L Stainless Steel Lap Joint Flanges in a wide range sizes, surface treatment, and ASTM standards. UNS S31703 | WNR 1.4438 | Alloy 317L. We offer you DIN spec certified Flanges from rough B16.5 forgings, at a competitive cost.

BS 4504 317L Lap Joint Flanges DN50 PN10 are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for 150# Stainless Steel 317L Lap Joint Flanges, the standard height is 1/16" for ANSI B16.9 Lap Joint Flanges under 400#. For SAE 317L Lap Joint Flanges of 400# and up, the standard AISI 317L Lap Joint Flanges raised face height is 1/4". SUS 317L Lap Joint Flanges in our stock include ANSI B16.5 SS 317L Lap Joint Flanges, ASME B16.47 Series "A" ASTM A182 UNS S31703 Lap Joint Flanges, ASME B16.47 Series "B" ASME SA182 UNS S31703 Lap Joint Flanges and Pressure Vessel 317L Lap Joint Flanges. We offer you DIN spec certified Flanges from rough B16.5 forgings, at a competitive cost.

We also carry a line of SS flanges and gaskets kits in a variety of materials including rubber, non-asbestos and Teflon.

317L Stainless Steel Lap Joint Flanges Specification

Product Name: 317L Stainless Steel Lap Joint Flanges
We accept all small/large quantity orders.

INOX 317L DIN2576 A182 F317L Lap Joint Flanges PN10 DN250 manufacturer, ASME B16.5 A182 F317L Lap Joint Flanges DN500 CL150 supplier, A182 UNS S31703 Lap Joint Flanges exporter, ANSI B16.5, ANSI B16.47, B16.48, BS4504, BS 10, EN-1092 SS 317L Lap Joint Flanges stockist, EN 1.4438 Lap Joint Flanges distributor, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Stainless Steel 317L Lap Joint Flanges dealer, Stainless Steel 317L ASME B16.5 Lap Joint Flanges Stockist in India

• 317L Grade: SUPER AUSTENITIC 317L Lap Joint Flanges/ SS 317L Lap Joint Flanges/ WNR 1.4438 Lap Joint Flanges/ UNS S31703 Lap Joint Flanges/ AISI 317L Lap Joint Flanges/ SUS 317L Lap Joint Flanges/ INOX 317L Lap Joint Flanges/ Alloy 317L Lap Joint Flanges/ SS317L Lap Joint Flanges/ Stainless Steel SUS 317L Lap Joint Flanges/ ANSI 317L Lap Joint Flanges/ Steel 317L Lap Joint Flanges/ Stainless Steel UNS S31703 Lap Joint Flanges/ SAE 317L Lap Joint Flanges/ ASME SA182 SS 317L Lap Joint Flanges/ SS 2367 / Stainless Steel DIN 1.4438 / Type 317L / X 2 CrNiMo 18 16 / SS317L
• Typical manufacturing specifications: ASTM A182 F317L, ASTM A182 F317L, ASME SA182 F317L, ASME SA182 F317L, SAE J405, MSS SP-43, ASTM B16.9
• Origin: European Origin, Indian Origin, US Origin, Korean Origin, Sweden Origin, Ukraine Origin, Japanese Origin Materials
• Top 10 Manufacturer of 317L Lap Joint Flanges: Raccortubi S.p.A. Lap Joint Flanges, Italy, Erne Fittings Lap Joint Flanges, Austria, Melesi Lap Joint Flanges, Italy, Mega Lap Joint Flanges, Italy, Ulma Lap Joint Flanges, Spain, TecnoForge Lap Joint Flanges, Italy, BENKAN Corporation Lap Joint Flanges, Japan, BKL- Thai Benkan Lap Joint Flanges, Thailand, Lame S.r.l. Lap Joint Flanges, Italy, Metal far Lap Joint Flanges, Italy, Steber Steel, India
• Delivery: 15-20 days
• Application: Research, science, and industry for sterile and aseptic process engineering.
• Material: DIN 1.4305, DIN 1.4301, DIN 1.4307, DIN 1.4948, DIN 1.4401, DIN 1.4404, DIN 1.4919, DIN 1.4571, DIN 1.4541, DIN 1.4878, DIN 1.4460, DIN 1.4550, DIN 1.4961, DIN 1.4840, DIN 1.4845, DIN 1.4449, DIN 1.4438, DIN 1.4841, DIN 1.4006, DIN 1.4005, DIN 1.4021, DIN 1.4016, DIN 1.4104, DIN 1.4057, DIN 1.4125, DIN 1.4762, DIN 1.4742, DIN 1.4438, DIN 1.4542, DIN 1.4545, DIN 1.4534, DIN 1.4980, DIN 1.3964
• These Lap Joint Flanges are recognized by ASME Pipe Codes such as ASME B31.1 Power Piping, and ASME B31.3 Process Piping

ASME/ ANSI, EN, DIN, AFNOR, AWWA, GOST, BS, JIS, AS, MSS, SA, UNI SS 317L Lap Joint Flanges

S 317L Lap Joint Flanges Manufacturing Standards	ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, BS EN1092-1 PN10/16/25/40 Type 01, 05, 11, 12, & 13.
Specifications:	ASTM A182 / ASME SA182, ASTM A182 / ASME SA182
Standard:	ANSI Lap Joint Flanges, ASME Lap Joint Flanges, BS Lap Joint Flanges, DIN Lap Joint Flanges, EN Lap Joint Flanges, etc.
Size Range	1/2″ (15 NB) to 48″ (1200NB), ASME B16.47 Lap Joint Flanges size range: 26″ to 60″
Class / Pressure	150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Lap Joint Flanges Face Type	Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Value Added Service	Polish (Electro & Commercial) Heat Treatment Annealed & Pickled Sand Blasting Machining Etc.
AWWA Lap Joint Flanges ratings	only at atmospheric temperature
ANSI Lap Joint Flanges ratings	installations from -20°F to 1500°F
ANSI Class Lap Joint Flanges	150 to 2500 Size: 1/2"-24"
AWWA Class Lap Joint Flanges	classes B, D, E, F Size: 3"-144"
AWWA Lap Joint Flanges	AWWA Standard for Steel Pipe Flanges for Waterworks Service-Sizes 4 In. Through 144 In.
ANSI B16.5 Lap Joint Flanges	Pipe Flanges and Flanged Fittings
ANSI B16.5 Lap Joint Flanges pressure classes	150, 300, 400, 600, 900, 1500 and 2500 for ASME B16.5
ANSI B16.47 Lap Joint Flanges pressure classes	75, 150, 300, 400, 600, 900 for ASME B16.47
Specialized in	317L STAINLESS STEEL SORF, SOFF, BLRF, BLFF, WNRF, WNFF, SWRF, SWFF, Threaded RF, Threaded FF & LJ
Sealing surface:	FF ,RF, LJ, FM , R.T.J , R.J and so on
Application	Petroleum, Chemical, Power, Gas, Water, Linepipe, Heat Exchanger, Shipbuilding, Construction, Etc

317L Stainless Steel Lap Joint Flanges Dimensions

Lap Joint Flanges – ANSI B16.5 Class 150 lbs

Weights are based on manufacturer’s data and are approximate.

317L Stainless Steel Lap Joint Flanges Packaging & Shipping:

SS 317L Lap Joint Flanges Packing: We focus on every procedure to assure quality, the package we usually take is pack WNR 1.4438 Lap Joint Flanges with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation.

Steber Steel offers just about everything to meet your UNS S31703 Lap Joint Flanges pack requirements. Lot of emphasis is placed on the packing and packaging. The AISI 317L Lap Joint Flanges are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.

317L Stainless Steel Lap Joint Flanges Marking: All SUS 317L Lap Joint Flanges are marked with size and specification. Or as per customer’s requirement;

So, besides the fact that we can arrange freight transportation for you, we can before that:

• Specifically mark parts or packages;
• Provide for a special packing according to what is required by the shipping method or by you.

We mark the INOX 317L Lap Joint Flanges as needed with the most suitable marking technique.

When packaging and packing, our experienced warehouse staff systematically takes the greatest precautions for your Alloy 317L Lap Joint Flanges to be optimally protected during transportation. We pack the SS317L Lap Joint Flanges according to the appropriate method: strapped pallet, wooden crate, overseas packing.

Markings on the Stainless Steel 317L, UNS S31703,  WNR 1.4438 Lap Joint Flanges

The full identification of the Lap Joint Flanges should be continuously marked down its whole length, including:

1. Nominal Lap Joint Flanges Size of 317L Lap Joint Flanges
2. Class of SS 317L Lap Joint Flanges
3. Specification of SS 317L Lap Joint Flanges
4. Grade of SS 317L Lap Joint Flanges
5. Heat Number for of SS 317L Lap Joint Flanges
6. Manufacturer’s Name or Symbol of 317L SS Lap Joint Flanges
7. Customized marking available for SS 317L Lap Joint Flanges

CONTACT US FOR A QUICK QUOTE, Get 317L Stainless Steel Elbow price list, send an email to us at sales@stebersteel.net, stebersteel@gmail.com

317L Stainless Steel Lap Joint Flanges Weight Chart

ANSI B16.5 -½ “-24” SS 317L Forged Lap Joint Flanges

CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
150 lb	½	1	1	2	1	2	2
	¾	2	2	2	2	2	2
	1	2	2	2	2	2	3
	1¼	3	3	3	3	3	3
	1½	3	3	3	3	4	4
	2	5	5	5	5	5	6
	2½	8	8	8	8	7	10
	3	9	9	9	9	9	11.5
	3½	11	12	11	11	13	12
	4	13	13	13	13	17	16.5
	5	15	15	15	15	20	21
	6	19	19	19	19	27	26
	8	30	30	30	30	47	42
	10	43	43	43	43	70	54
	12	64	64	64	64	123	88
	14	90	90	90	105	140	114
	16	106	98	98	140	180	140
	18	130	130	130	160	220	165
	20	165	165	165	195	285	197
	22	185	185	185	245	355	225
	24	220	220	220	275	430	268
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
300 lb	½	2	2	3	2	2	2
	¾	3	3	3	3	3	3
	1	3	3	3	3	4	4
	1¼	4.5	4.5	4	4.5	6	5
	1½	6.5	6.5	6	6.5	7	7
	2	7	7	7	7	8	9
	2½	10	10	10	10	12	12
	3	13	14	13	14.5	16	18
	3½	17	17	17	17	21	20
	4	23.5	24	22	24	28	26.5
	5	29	31	28	28	37	36
	6	39	39	39	39	50	45
	8	58	58	58	58	81	69
	10	81	81	81	91	124	100
	12	115	115	115	140	185	142
	14	165	165	165	190	250	206
	16	210	220	190	234	315	250
	18	253	280	250	305	414	320
	20	315	325	315	375	515	400
	22	370	370	370	435	640	465
	24	490	490	475	550	800	580
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
400 lb	½	2	2	2	2	2	3
	¾	3	3	3	3	3	3.5
	1	3.5	3.5	3.5	3.5	4	4
	1¼	4.5	4.5	4.5	4.5	6	4.5
	1½	6.5	6.5	6.5	6.5	8	8
	2	8	8	8	8	10	10
	2½	12	12	12	11	15	14
	3	15	15	15	14	20	18
	3½	21	21	21	20	29	26
	4	26	26	26	25	33	35
	5	31	31	31	29	44	43
	6	44	44	44	42	61	57
	8	67	67	67	64	100	89
	10	91	91	91	110	155	125
	12	130	130	130	152	226	175
	14	191	191	191	210	310	233
	16	253	253	253	280	398	295
	18	310	310	310	345	502	360
	20	378	378	378	420	621	445
	22	405	405	405	455	720	505
	24	539	539	539	615	936	640
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
600 lb	½	2	2	2	2	3	3
	¾	3	3	3	3	4	4
	1	4	4	4	4	4	4
	1¼	5	5	5	5	6	6
	1½	7	7	7	7	8	8
	2	9	9	9	9	10	12
	2½	13	13	13	12	15	18
	3	16	16	16	15	20	23
	3½	21	21	21	20	29	26
	4	37	37	37	36	41	42
	5	63	63	63	63	68	68
	6	80	80	80	78	86	81
	8	115	15	15	112	140	120
	10	177	177	177	195	231	190
	12	215	215	215	240	295	226
	14	259	259	259	290	378	347
	16	366	366	366	400	527	481
	18	476	476	476	469	665	555
	20	612	612	612	604	855	690
	22	590	590	590	670	1000	720
	24	876	876	876	866	1250	977
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
900 lb	½	6	6	6	6	4	7
	¾	6	6	6	6	6	7
	1	7.5	7.5	7.5	7.5	9	8.5
	1¼	10	10	10	10	10	10
	1½	14	14	14	14	14	14
	2	22	22	22	21	25	24
	2½	31	31	31	25	32	31
	3	36	36	36	29	35	36
	4	53	53	53	51	54	53
	5	83	83	83	81	87	86
	6	110	110	110	105	115	110
	8	172	172	172	190	200	187
	10	245	245	245	277	290	268
	12	326	326	326	371	415	372
	14	400	400	400	415	520	562
	16	459	459	459	488	619	685
	18	647	647	647	670	880	924
	20	792	792	792	868	1107	1164
	24	1480	1480	1480	1659	2099	2107
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
1500 lb	½	6	6	6	6	4	7
	¾	6	6	6	6	6	7
	1	8	8	8	8	9	9
	1¼	10	10	10	10	10	10
	1½	14	14	14	14	14	14
	2	25	25	25	25	25	25
	2½	36	36	36	35	35	36
	3	48	48	48	47	48	48
	4	73	73	73	75	73	73
	5	132	132	132	140	140	132
	6	165	165	165	170	160	165
	8	260	260	260	286	302	275
	10	436	436	436	485	510	455
	12	667	667	667	749	775	690
	14	940	940	940	890	975	940
	16	1250	1250	1250	1250	1300	1250
	18	1625	1625	1625	1475	1750	1625
	20	2050	2050	2050	1775	2225	2050
	24	2825	2825	2825	2825	3625	3325
CLASS	Nominal Pipe Size	Slip On	Threaded	Socket Weld	Lap Joint	Blind	Weld Neck
2500 lb	½	….	7	….	7	7	8
	¾	….	9	….	8	10	9
	1	….	12	….	12	12	13
	1¼	….	18	….	17	18	20
	1½	….	25	….	24	25	28
	2	….	38	….	37	39	42
	2½	….	55	….	53	56	52
	3	….	83	….	80	86	94
	4	….	127	….	122	133	146
	5	….	210	….	204	223	244
	6	….	323	….	314	345	378
	8	….	485	….	471	533	576
	10	….	925	….	897	1025	1068
	12	….	1300	….	1262	1464	1608

SS 317L Lap Joint Flanges Standards / Pressure Class

ASME/ANSI B 16.5	Lap Joint Flanges
PRESSURE CLASS	Class 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47	Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS	75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36	Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS	300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1	Lap Joint Flanges
PRESSURE CLASS	PN 2.5 TO PN 40
BS 4504[PART 1]	Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS	PN 2.5 TO PN 400
BS 1560 BOSS	Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
BS10	Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE	D, E, F, H
DIN FLANGES	DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS	PN 6 TO PN 100

What are PN10, PN16 and PN25 Standards Lap Joint Flanges

PN10, PN16, PN25 and PN40 specify both pressure class in bars of pressure, and metric Lap Joint Flanges dimensions (such as bolt circle diameter, hole size, bolt size etc) according to international flange standards such as ISO 7005-1 or DIN 2501 that use the metric system of measurements. Lap Joint Flanges produced to ANSI, AWWA, ASA, or old British standards that are dimensioned in inches will not mate up with metric flanges in general. It is good practice when specifying a PN flange standard to indicate the actual working pressure since it is a common occurrence that a specific PN, say PN16, flange drilling is required on a fitting or valve to match adjacent flanges, but the pressure requirement is less than PN16.

British Standard Lap Joint Flanges BS10 Lap Joint Flanges	Table D Table E Table F Table G Table H Table J Table K		Table D is the most popular for applications with water. All dimensions are specified in inches.
Australian Standard Lap Joint Flanges AS2129 Lap Joint Flanges	Table C Table D Table E Table F Table G Table H Table J		These Lap Joint Flanges are equivalent to the BS10 Lap Joint Flanges, except that all dimensions are specified in mm. In some sizes, bolt holes are slightly larger to give better clearance.
American National Standards Institute Lap Joint Flanges ANSI Lap Joint Flanges	ANSI 125 ANSI 150 ANSI 300 ANSI 600 ANSI 900 ANSI 1500		Higher numbers denote higher pressures. Sometimes people use the word ‘Class’ instead of ANSI. e.g. an ANSI 150 Lap Joint Flanges might be called a ‘Class 150’ All dimensions are specified in inches.
British Standard Lap Joint Flanges BS4504 Lap Joint Flanges	BS4504-6 BS4504-10 BS4504-16 BS4504-25 BS4504-40 BS4504-64 BS4504-100	PN6 PN10 PN16 PN25 PN40 PN64 PN100	Engineers use the prefix PN (Pressure Nominale). e.g. a BA4504-16 flange will commonly be referred to as a PN16 Generally, a PN16 flange is designed to withstand pressures up to 16 bar. All dimensions are specified in mm.

½" A182 F317L Lap Joint Flanges	DN15
¾" A182 F317L Lap Joint Flanges	DN20
1" A182 F317L Lap Joint Flanges	DN25
1¼" A182 F317L Lap Joint Flanges	DN32
1½"  Lap Joint Flanges	DN40
2" A182 F317L Lap Joint Flanges	DN50
2½" A182 F317L Lap Joint Flanges	DN65
3" A182 F317L Lap Joint Flanges	DN80
4" A182 F317L Lap Joint Flanges	DN100
5" A182 F317L Lap Joint Flanges	DN125
6" A182 F317L Lap Joint Flanges	DN150
8" A182 F317L Lap Joint Flanges	DN200
10" A182 F317L Lap Joint Flanges	DN250
12" A182 F317L Lap Joint Flanges	DN300
14" A182 F317L Lap Joint Flanges	DN350
15" A182 F317L Lap Joint Flanges	DN375
16" A182 F317L Lap Joint Flanges	DN400
18" A182 F317L Lap Joint Flanges	DN450
20" A182 F317L Lap Joint Flanges	DN500
24" A182 F317L Lap Joint Flanges	DN600

SS 317L Other Products Stock List

• 317L Pipe
• 317L Tube
• 317L Tubing
• 317L Stainless Steel Sheet
• 317L Stainless Steel Plate
• SS 317L Round Bar
• SS 317L Rod
• SS 317L Pipe Fittings

317L Stainless Steel Lap Joint Flanges Chemical Composition

Chemical Composition, %

Ni	Cr	Mo	Mn	Si
11.0 – 15.0	18.0 – 20.0	3.0 – 4.0	2.0 Max	.75 Max
C	N	S	P	Fe
0.03 Max	0.1 Max	0.03 Max	0.045 Max	Balance

317L Stainless Steel Lap Joint Flanges Mechanical Properties

Ultimate Tensile Strength, ksi Minimum	.2% Yield Strength, ksi Minimum	Elongation Percent	Hardness Max.
75	30	35	217 Brinell

Physical Properties of 317L Stainless Steel Lap Joint Flanges

Density: 0.285 lb/inch3 
Melting Point: 2540 – 2630°F 
Poisson’s Ratio: 0.3 
Electrical Resistivity: 475 Ohm-circ mil/ft

Temperature, °F	70	212	392	572
Coefficient* of Thermal Expansion, in/in°F x 10-6	–	9.2	10.1	10.8
Thermal Conductivity Btu • ft/ft2 • hr • °F	7.8	–	–	–
Modulus of Elasticity Dynamic, psi x 106	29	–	–	–

* 70°F to indicated temperature.

317L Lap Joint Flanges Specifications

Grade	UNS No	Old British	Euronorm (DIN)
		BS	WERKSTOFF NR.	DIN Name
Type 317L	S31703	317 S 12	1.4438	X2CrNiMo18-15-4
Normen	KS	AFNOR	NAS	Japanese JIS
	STS317L/ D3693/G3601	Z 2 CND 19-15	NAS 317L	SUS 317L

Standards

HDIN / EN	US-Standard	AFNOR	UNI	JIS
X2CrNiMo18-15-4 X2CrNiMo1864	AISI 317L  UNS S31703		X2CrNiMo1815	SUS317L SUS317LFB SUS317LTB SUS317LTP SUSF317L SUSY317L
DIN X2CrNiMo18-15-4, DIN X2CrNiMo1864, ANFOR Z2CND19-15-04, ANFOR Z3CND19-15-04, UNI X2CrNiMo1815, JIS SUS317L, JIS SUS317LFB, JIS SUS317LTB, JIS SUS317LTP, JIS SUSF317L, JIS SUSY317L, AISI 317L, UNS S31703

317L Stainless Steel Lap Joint Flanges Possible Alternative Grades

317L Stainless Steel Lap Joint Flanges Equivalent Grades

British		German
AISI	UNS					Swedish	Japanese
ASTM	No.					SS	JIS
Type		Bs	Eu	W.No.	DIN
317	S31700	317S16	–	1.4449	X 5 CrNiMo 17 13	–	-SUS 317
317L	S31703	317S12	–	1.4438	X 2 CrNiMo 18 16	2367	SUS 317L

SUS 317L Lap Joint Flanges Heat Resistance

Significantly better corrosion resistance that T-316 in the same environments. Good oxidation resistance in continuous service to 925°C and in intermittent service to 879°C.

AISI 317L Lap Joint Flanges Heat Treatment

AISI 317L stainless steel Lap Joint Flanges is non-magnetic in the annealed condition and is non-hardenable by heat treatment. Machinability is 39% – 65 surface feet per minute.

SS 317L Lap Joint Flanges Fabrication

Alloy 317L stainless steel Lap Joint Flanges can be easily welded and processed by standard shop fabrication practices.

317L Stainless Steel Lap Joint Flanges producing through Cold forming

Shearing, stamping, heading and drawing can be successfully performed . To remove internal stresses, a post-work annealing is recommended.

Stainless Steel 317L Lap Joint Flanges Machining

Low speeds and constant feeds will minimize this alloy’s tendency to work harden. Tougher than 304 stainless steel Lap Joint Flanges with a long stringy chip, the use of chip breakers is recommended.

317L Lap Joint Flanges Welding

317L stainless steel Lap Joint Flanges can be readily welded by most standard processes. A post weld heat treatment is not necessary. 317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.

Alloy 317L Lap Joint Flanges Hot Forming

317L stainless steel Lap Joint Flanges are non-magnetic in the annealed condition and is non-hardenable by heat treatment. Machinability is 39% – 65 surface feet per minute.

317L Stainless Steel Lap Joint Flanges Applications & Usage:

Some of the major applications of grade stainless steel 317L Lap Joint Flanges include:

• SAE 317L Lap Joint Flanges for Air Pollution Control- scrubbers for coal-fired power plants
• UNS S31703 Lap Joint Flanges mainly used for Seawater cooling devices
• SS 317L Lap Joint Flanges can be use in Wiring in electrostatic precipitators
• EN 1.4438 Lap Joint Flanges are used in Oil refinery components
• AISI 317L Lap Joint Flanges also useful for Gas scrubbing plants
• SUS 317L Lap Joint Flanges are commonly used by Pulp and paper processing industries
• INOX 317L Lap Joint Flanges are also suitable for Acetic, phosphoric and sulphuric acid processing plants
• Alloy 317L Lap Joint Flanges available for Oil and Gas Production- offshore process equipment
• Offshore, sea water technology, chemical industry, good stability against reducing acids of medium strength like sulphuric acid and phosphoric acid and various chloric media, refinery, paper industry, pulp industry

MSS, API, AWWA, ANSI AND CSA STANDARDS

ANSI, MSS and API standards govern flange dimensions and tolerances. ASME/ANSI B16.5, titled “ Steel Pipe Flanges and Flanged Fittings”, is the basic standard. It covers forged steel flanges, sizes NPS 1/2 (DN 15) through NPS 24 (DN 600). CSA standard CAN3-Z245 12-M96 covers the manufacture, dimensions, tolerances and material requirements for pipe line flanges. ASME/ANSI B16.36 covers Orifice flanges. The following MSS, API and AWWA standards are written to supplement B16.5:

• MSS SP-6: Flange facings
• MSS SP-9: Spot facing for bronze, iron and steel flanges
• MSS SP-25: Marking of flanges
• MSS SP-39: Bolts and nuts for flanges
• API6A: Wellhead equipment
• AWWA C207: Hub flanges

The following codes are not flange specifications, but they influences the manufacture of forged steel flanges:

• ASME: Boiler and Pressure Vessel Code
• ASME/ANSI B31.1: Power Piping
• ASME/ANSI B31.3: Petroleum and refinery piping
• ASME/ANSI B31.4: Liquid petroleum transportation piping systems
• ASME/ANSI B31.5: Refrigeration piping
• ASME/ANSI B31.8: Gas transmission and distribution piping systems
• ANSI/ASME B36.10M: Standard for wrought steel pipe
• ANSI/ASME B36.19M: Standard for stainless steel pipe
• ANSI/ASME B16.47: Large diameter pipe line flanges NPS 22 (DN 550) and NPS 26 (DN 650) through NPS 36 (DN900)

Export Destinations for 317L Stainless Steel Lap Joint Flanges

Steber Steel is a leading exporter and distributor of stainless steel 317L Lap Joint Flanges in India and international markets such as Malaysia, Iran, Germany, UK, Canada, UAE, Bahrain, Indonesia, Mexico, Chile, Brazil, Peru, Nigeria, Kuwait, Jordan, Thailand (Bangkok), Saudi Arabia, Venezuela, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan. A widest range of SS 317L Lap Joint Flanges ready stock available in Middle East countries including Bahrain, Iraq, Israel, Jordan, Cyprus, Egypt, Iran, Kuwait, Lebanon, Oman, Saudi Arabia, Syria, Turkey, United Arab Emirates, Palestine, Qatar and Yemen. Get best deals from distributor of 317L Stainless Steel Lap Joint Flanges.

Domestic Supply Destinations for Stainless Steel 317L Lap Joint Flanges and SS 317L Threaded Lap Joint Flanges

Our SS 317L products are supplied to all major Industrial areas and cities in India such as Mumbai, Ahmedabad, Chennai, Bangalore, Hyderabad, Assam, Siliguri, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Delhi, Vadodra, Nashik, Thoothukudi, Rajkot, Aurangabad, Salem, Bhilai, Bhiwandi, Bikaner, Jamshedpur, Warangal, Nellore, Agartala, Ranchi, Coimbatore, Raipur, Mysore, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Bhubaneswar and Faridabad. For any location in your country you can find here trader of Stainless Steel 317L Lap Joint Flanges in India, If your requirement is urgent we can offer a priority shipping service, but also if time is not so critical we can offer more cost-effective options to ensure you get the best value for money.

Other Lap Joint Flanges Related to 317L Stainless Steel Lap Joint Flanges

317L Lap Joint Flanges Price

• ANSI B16.5 150# SOLJ 4" SA182 F317L Lap Joint Flanges
  FOB Price: US $1-100 / Piece
• 2" SA182 F317L SOLJ CLASS 150 FLANGE
  FOB Price: US $1-100 / Piece
• ASTM A182 F317L Stainless Steel RF Lap Joint Flanges
  FOB Price: US $0.5-200 / Piece
• ANSI 150# SOLJ 4" F317L
  FOB Price: US $1-100 / Piece
• ASME SOLJ flange F317L
  FOB Price: US $1-10 / Piece
• ANSI B16.5 150# 4" stainless steel F317L SOLJ flange
  FOB Price: US $1-50 / Piece
• 300# SOLJ flange F317L
  FOB Price: US $1-10 / Piece
• A182 F317L SOLJ stainless steel flanges
  FOB Price: US $0.1-100 / Piece
• 2" SA182 F317L SOLJ CLASS 150 FLANGE
  FOB Price: US $1-100 / Piece
• SOLJ ANSI DN80 PN16 forged flanges F 317L
  FOB Price: US $1-2500 / Piece
• SOLJ ANSI DN80 PN16 forged flange
  FOB Price: US $1-999 / Piece
• DIN2503 SOLJ Flange DN50 PN16
  FOB Price: US $0.23 / Piece
• DIN 2576 PN10 Slip On Flange,DIN2543 PN16 SOLJ FLANGE,F317L
  FOB Price: US $0.2-90 / Piece
• BS4504 PN16 SOLJ Casting Flange Manufacturer
  FOB Price: US $800-1000 / Metric Ton
• ISO STAINLESS STEEL PN16 SOLJ FLANGE
  FOB Price: US $1-100 / Piece
• DIN2503 SOLJ Flange DN50 PN16
  FOB Price: US $0.1-1000 / Piece
• PN16 SOLJ Flange
  FOB Price: US $0.1-500 / Meter
• PN16 dn100 flange with high quality
  FOB Price: US $3.3-230 / Piece
• EN1092-1 forged steel flange SOLJ raised face RF PN16
  FOB Price: US $1-899 / Piece

India’s leading manufacturer & supplier of Stainless Steel 317L Lap Joint Flanges. Widest stock of 317L Lap Joint Flanges in India enable us for prompt delivery to near by countries like Dubai-UAE, Kuwait, Qatar, Saudi Arabia, Turkey, Israel, Iraq, Iran, Oman, Bahrain, Nigeria, Kenya, South & West Africa, Indonesia, Malaysia, Singapore, Thailand & Philippines in any emergency. Supplier & distributor of Alloy 317L Lap Joint Flanges globally in any size & schedule. We have a large inventory 317L Lap Joint Flanges, UNS S31703 SS 317L screwed Lap Joint Flanges, WNR 1.4438 SS Grade WP317L Lap Joint Flanges, manufacturer of ASME B16.5 ASTM A182 F317L Lap Joint Flanges CL150 DN500, ASME B16.5 F317L Lap Joint Flanges 4 Inch 300LBS dealer, Distributor of A182 Stainless Steel 317L Lap Joint Flanges 1500LB 8 Inch, supplier of ANSI B16.5 Stainless Steel 317L Forged Lap Joint Flanges 250 Lbs, 317L Stainless Steel 36" A182 F317L Lap Joint Flanges exporter in India, ASME B16.47 SS 317L Lap Joint Flanges Stockist, DIN 1.4438 Lap Joint Flanges Wholesaler, ASME B16.5 A182 F317L Lap Joint Flanges DN250 SCH100 Stockholder, DIN2576 A182 F317L Lap Joint Flanges PN10 DN25, ASME B16.5 A182 F317L Lap Joint Flanges DN25 SCH40S PN16

Distributor, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM A182 F317L Stainless Steel 317L Lap Joint Flanges