ASTM A403 WP317L Stainless Steel Cap Manufacturer, Manufacturer of SS 317L End Cap, ASTM A182 317L Forged Cap supplier, Stainless Steel 317L Cap manufacturer

SS 317L Cap Stockist, SS 317L Seamless Cap Stockholder, AISI 317L Forged Cap Dealers in Mumbai, SS 317L Threaded Cap Dealer, ANSI B16.9 Stainless Steel 317L Cap Distributor, EN 1.4438 Cap stockholder in India

Looking for Alloy 317L ASTM A403 WP317L Screwed Cap traders in India? Manufacturer of ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Stainless Steel 317L Cap Suppliers, SUS 317L Threaded Cap Stockist, Supplier of INOX 317L ASTM A403 WP317L Stainless Steel Cap, Alloy 317L Butt Weld Cap distributor near you, A403 UNS S31703 Cap dealer, DIN 1.4438 Cap Wholesaler, UNS S31703 Buttweld Cap stockist

What is 317L Stainless Steel Cap?

Stainless Steel 317L Pipe Cap are useful even after long storage periods, all components of a pipe must still meet the requirements of industry regulations and standards. Activities like hook lifting, however, may cause serious damage to sensitive parts, such as bevels or internal coatings.

ASTM A403 Stainless Steel 317L End Cap help to prevents contamination of the pipe interior from environmental influences, such as dirt, dust, water, snow, animals, etc.

Steber Steel is only Supplier in India who maintains Large Diameter and High Thickness ASTM A403 Seamless, Welded Stainless Steel 317L Cap. All SS 317L Cap are manufactured in India, with raw materials coming from reputed Mills in India enable us for prompt delivery to countries like Dubai, Ras Al Khaimah, UAE, Kuwait, Qatar, Saudi Arabia, Turkey, Israel, Iraq, Iran, Oman, Bahrain, Nigeria, Kenya, Mozambique, South & West Africa, Indonesia, Malaysia, Singapore, Thailand & Philippines in any emergency or industrial break down..

We are manufacturer and supplier of 317L Stainless Steel Cap, pipe end cap, end cap for pipe, end cap, Domed Weld-On Pipe & Tube Caps, Dished disk weld-on caps,  Type B – Bullet Drive-On Cap, Type D – Dished Drive-On Cap,  Type F – Flat Drive-On Cap in a wide range sizes, surface treatment, and ASTM standards. UNS S31703 | WNR 1.4438 | Alloy 317L. We produce these Stainless Steel 317L Cap as per international standards of ASTM A403/SA403 or A182/SA182.

317L Stainless Steel Cap Specification

Product Name: 317L Stainless Steel Cap
We accept all small/large quantity orders.

Wrought Austenitic Stainless Steel 317L SCH 5 Cap manufacturer, high quality Stainless Steel WP317L Cap Suppliers in India, 317L SS SCH 10 Cap manufacturer, SS Grade WP317L SCH 40 Cap stockist, SS 317L SCH 80 Cap stockholder, ASTM A403 WP317L NPT Threaded Cap for Sale, ASTM A403 WP317L Stainless Steel Reducing Cap at Best Price

• 317L Grade: SUPER AUSTENITIC 317L Cap/ SS 317L Cap/ WNR 1.4438 Cap/ UNS S31703 Cap/ AISI 317L Cap/ SUS 317L Cap/ INOX 317L Cap/ Alloy 317L Cap/ SS317L Cap/ Stainless Steel SUS 317L Cap/ ANSI 317L Cap/ Steel 317L Cap/ Stainless Steel UNS S31703 Cap/ SAE 317L Cap/ ASME SA403 SS 317L Cap/ SS 2367 / Stainless Steel DIN 1.4438 / Type 317L / X 2 CrNiMo 18 16 / SS317L
• Typical manufacturing specifications: ASTM A403 WP317L, ASTM A403 WP317L, ASME SA403 WP317L, ASME SA403 WP317L, SAE J405
• S 317L Cap Manufacturing Standards: ASME: ANSI B16.9, ANSI B16.11, ANSI B16.28, MSS-SP-43, DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, EN: EN10253-1, EN10253-2, BS 4504, EN-1092, JISB2311, JIS B2312, JIS B2313, DIN 2605, DIN 2606, DIN2615, DIN2616, BG12459-90, GB/T13401, HGJ514, SH3408, SH3409, HG/T21635, HG/T21631
• Size Range: 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
• Thickness: SCH: 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS, Custom Thickness
• Origin: European Origin, Indian Origin, US Origin, Korean Origin, Sweden Origin, Ukraine Origin, Japanese Origin Materials
• Top 10 Manufacturer of 317L Cap: Raccortubi S.p.A. Pipe Cap, Italy, Erne Fittings Pipe Cap, Austria, Melesi Pipe Cap, Italy, Mega Pipe Cap, Italy, Ulma Pipe Cap, Spain, TecnoForge Pipe Cap, Italy, BENKAN Corporation Pipe Cap, Japan, BKL- Thai Benkan Pipe Cap, Thailand, Lame S.r.l. Pipe Cap, Italy, Metal far Pipe Cap, Italy, Steber Steel, India
• Great offer on: Pipe caps– DIN 28011 / EN 10253 (DIN 2617), Pipe Elbow -EN 10253 type A (DIN 2605), Pipe Tee/ T-pieces with same outlet – EN 10253 type A (DIN 2615), Concentric reducers- EN 10253 type B (DIN 2616)
• Delivery: 15-20 days
• Application: Research, science, and industry for sterile and aseptic process engineering.
• Material: DIN 1.4305, DIN 1.4301, DIN 1.4307, DIN 1.4948, DIN 1.4401, DIN 1.4404, DIN 1.4919, DIN 1.4571, DIN 1.4541, DIN 1.4878, DIN 1.4460, DIN 1.4550, DIN 1.4961, DIN 1.4840, DIN 1.4845, DIN 1.4449, DIN 1.4438, DIN 1.4841, DIN 1.4006, DIN 1.4005, DIN 1.4021, DIN 1.4016, DIN 1.4104, DIN 1.4057, DIN 1.4125, DIN 1.4762, DIN 1.4742, DIN 1.4438, DIN 1.4542, DIN 1.4545, DIN 1.4534, DIN 1.4980, DIN 1.3964
• Value Added Service: Polish (Electro & Commercial), Heat Treatment, Annealed & Pickled, Sand Blasting, Machining Etc.

Types of 317L Stainless Steel Cap

317L Stainless Steel Cap Packaging & Shipping:

SS 317L Cap Packing: We focus on every procedure to assure quality, the package we usually take is pack WNR 1.4438 Cap with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation.

Steber Steel offers just about everything to meet your UNS S31703 Cap pack requirements. Lot of emphasis is placed on the packing and packaging. The AISI 317L Cap are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.

317L Stainless Steel Cap Marking: All SUS 317L Cap are marked with size and specification. Or as per customer’s requirement;

So, besides the fact that we can arrange freight transportation for you, we can before that:

• Specifically mark parts or packages;
• Provide for a special packing according to what is required by the shipping method or by you.

We mark the INOX 317L Cap as needed with the most suitable marking technique.

When packaging and packing, our experienced warehouse staff systematically takes the greatest precautions for your Alloy 317L Cap to be optimally protected during transportation. We pack the SS317L Cap according to the appropriate method: strapped pallet, wooden crate, overseas packing (ISPM15).

Markings on the Stainless Steel 317L, UNS S31703,  WNR 1.4438 Cap

The full identification of the Cap should be continuously marked down its whole length, including:

1. Nominal Cap Size of 317L Cap
2. Schedule (Wall Thickness) eg SCH 40 SS 317L Cap
3. Specification of SS 317L Cap
4. Grade of Alloy 317L Cap
5. Method of Manufacture (Seamless or Welded) of of SS 317L Cap
6. Heat Number for of SS 317L Cap
7. Manufacturer’s Name or Symbol of of 317L SS Cap
8. Customized marking available for SS 317L Cap

CONTACT US FOR A QUICK QUOTE, Get 317L Stainless Steel Elbow price list, send an email to us at sales@stebersteel.net, stebersteel@gmail.com

317L Stainless Steel Cap Dimensions

Nominal Pipe Size	Outside diameter at bevel	Length (E)	Limit wall thickness
1/2″	21.3	25	4.57
3/4″	26.7	25	3.81
1″	33.4	38	4.57
1 1/4″	42.2	38	4.83
1 1/2″	48.3	38	5.08
2″	60.3	38	5.59
2 1/2″	73.0	38	7.11
3″	88.9	51	7.62
3 1/2″	101.6	64	8.13
4″	114.3	64	8.64
5″	141.3	76	9.65
6″	168.3	89	10.92
8″	219.1	102	12.70
10″	273.0	127	12.70
12″	323.8	152	12.70
14″	355.6	165	12.70
16″	406.4	178	12.70
18″	457.0	203	12.70
20″	508.0	229	12.70
22″	559.0	254	12.70
24″	610.0	267	12.70

The dimensions are in millimeters
Source : ASME B16.9 – 2007

CAPS – ANSI B 16.9 dimension
inches	mm	Height
		D	E
1/2	15	21,34	25,40
3/4	20	26,67	31,75
	25	33,40	38,10
1 1/4	32	42,16	38,10
1 1/2	40	48,26	38,10
2	50	60,32	38,10
2 1/2	65	73,02	38,10
3	80	88,90	50,80
3 1/2	90	101,60	63,50
4	100	114,30	63,50
5	125	141,30	76,20
6	150	168,27	88,90
8	200	219,07	101,60
10	250	273,05	127,00
12	300	323,85	152,40
14	350	355,60	165,10
16	400	406,40	177,80
18	450	457,20	203,20
20	500	508,00	228,60
22	550	558,80	254,00
24	600	609,60	266,70
28	700	711,20	266,70
Dimension in mm

317L STAINLESS STEEL CAPS – Ansi 16.9 tolerances

 

DIMENSIONAL TOLERANCES – CAPS
For all fittings				Caps
Nominal Pipe Size (NPS)	Outside Ø at Bevel	Inside Ø at End	Wall Thickness t / t1	Overall Length E
1/2 a 2 1/2	1	0,8	Not	4
3 a 3 1/2	1	1,6	less	4
4	+2 -1	1,6	than	4
5 a 6	+3 -1	1,6	87,50%	7
8	2	1,6	of nominal	7
10	+4 -3	3,2	tickness	7
12 a 18	+4 -3	3,2		7
20 a 24	+6 -5	4,8		7
26 a 30	+7 -5	4,8		10
32 a 48	+7 -5	4,8		10

317L Stainless Steel Cap Weight Chart

WEIGHTS OF SS 317L PIPE CAP
NPS inches	CAPS
	Sch. 5S	Sch. 10S	Sch. 40S	Sch. 80S
1/2	0.04	0.04	0.05	0.05
3/4	0.05	0.05	0.06	0.08
1	0.09	0.09	0.13	0.17
1 1/4	0.11	0.11	0.15	0.18
1 1/2	0.15	0.15	0.20	0.22
2	0.17	0.17	0.25	0.30
2 1/2	0.25	0.25	0.45	0.50
3	0.40	0.40	0.70	0.90
4	0.60	0.60	1.20	1.60
5	1.00	1.00	1.90	2.70
6	1.40	1.40	2.90	4.30
8	2.50	2.50	5.10	7.60
10	3.90	3.90	9.00	12.0
12	6.50	6.50	13.5	17.5
14	8.00	8.00	16.0	20.5
16	14.5	14.5	20.5	26.0
18	17.0	17.0	26.0	34.0
20	18.0	18.0	32.0	43.0
24	26.0	26.0	46.0	60.0
Approximate weights in kg, density 8 kg/dm3

SS 317L Other Products Stock List

ASTM A403 WP317L Sanitary Cap suppliers, WP317L Stainless Seamless Cap manufacturers, manufacturer of Stainless Steel 100% X-Ray Welded Cap WP317L, ASTM A403 WP 317L ANSI B16.9 Cap dealer, Distributor of WP 317L Stainless Steel Weld Cap, 317L Stainless Steel 36" Cap, supplier of 317L Stainless Steel 24" Cap SCH XXS, 317L Stainless Steel 36" SCH 160 Cap exporter in India

• 317L Pipe
• 317L Tube
• 317L Tubing
• 317L Stainless Steel Sheet
• 317L Stainless Steel Plate
• SS 317L Round Bar
• SS 317L Rod
• SS 317L Pipe Fittings

317L Stainless Steel Cap Chemical Composition

Chemical Composition, %

Ni	Cr	Mo	Mn	Si
11.0 – 15.0	18.0 – 20.0	3.0 – 4.0	2.0 Max	.75 Max
C	N	S	P	Fe
0.03 Max	0.1 Max	0.03 Max	0.045 Max	Balance

317L Stainless Steel Cap Mechanical Properties

Ultimate Tensile Strength, ksi Minimum	.2% Yield Strength, ksi Minimum	Elongation Percent	Hardness Max.
75	30	35	217 Brinell

Physical Properties of 317L Stainless Steel Cap

Density: 0.285 lb/inch3 
Melting Point: 2540 – 2630°F 
Poisson’s Ratio: 0.3 
Electrical Resistivity: 475 Ohm-circ mil/ft

Temperature, °F	70	212	392	572
Coefficient* of Thermal Expansion, in/in°F x 10-6	–	9.2	10.1	10.8
Thermal Conductivity Btu • ft/ft2 • hr • °F	7.8	–	–	–
Modulus of Elasticity Dynamic, psi x 106	29	–	–	–

* 70°F to indicated temperature.

317L Material Specifications

Grade	UNS No	Old British	Euronorm (DIN)
		BS	WERKSTOFF NR.	DIN Name
Type 317L	S31703	317 S 12	1.4438	X2CrNiMo18-15-4
Normen	KS	AFNOR	NAS	Japanese JIS
	STS317L/ D3693/G3601	Z 2 CND 19-15	NAS 317L	SUS 317L

Standards

HDIN / EN	US-Standard	AFNOR	UNI	JIS
X2CrNiMo18-15-4 X2CrNiMo1864	AISI 317L  UNS S31703		X2CrNiMo1815	SUS317L SUS317LFB SUS317LTB SUS317LTP SUSF317L SUSY317L
DIN X2CrNiMo18-15-4, DIN X2CrNiMo1864, ANFOR Z2CND19-15-04, ANFOR Z3CND19-15-04, UNI X2CrNiMo1815, JIS SUS317L, JIS SUS317LFB, JIS SUS317LTB, JIS SUS317LTP, JIS SUSF317L, JIS SUSY317L, AISI 317L, UNS S31703

317L Stainless Steel Cap Possible Alternative Grades

317L Stainless Steel Cap Equivalent Grades

British		German
AISI	UNS					Swedish	Japanese
ASTM	No.					SS	JIS
Type		Bs	Eu	W.No.	DIN
317	S31700	317S16	–	1.4449	X 5 CrNiMo 17 13	–	-SUS 317
317L	S31703	317S12	–	1.4438	X 2 CrNiMo 18 16	2367	SUS 317L

SUS 317L Cap Heat Resistance

Significantly better corrosion resistance that T-316 in the same environments. Good oxidation resistance in continuous service to 925°C and in intermittent service to 879°C.

AISI 317L Cap Heat Treatment

AISI 317L Cap is non-magnetic in the annealed condition and is non-hardenable by heat treatment. Machinability is 39% – 65 surface feet per minute.

SS 317L Cap Fabrication

Alloy 317L Cap can be easily welded and processed by standard shop fabrication practices.

317L Stainless Steel Cap producing through Cold forming

Shearing, stamping, heading and drawing can be successfully performed . To remove internal stresses, a post-work annealing is recommended.

Stainless Steel 317L Cap Machining

Low speeds and constant feeds will minimize this alloy’s tendency to work harden. Tougher than 304 stainless Cap with a long stringy chip, the use of chip breakers is recommended.

317L Cap Welding

Alloy 317L Cap can be readily welded by most standard processes. A post weld heat treatment is not necessary. 317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.

Alloy 317L Cap Hot Forming

AISI 317L Cap is non-magnetic in the annealed condition and is non-hardenable by heat treatment. Machinability is 39% – 65 surface feet per minute.

317L Stainless Steel Cap Applications & Usage:

Some of the major applications of grade stainless steel 317L Cap include:

• SAE 317L Cap for Air Pollution Control- scrubbers for coal-fired power plants
• UNS S31703 Cap mainly used for Seawater cooling devices
• SS 317L Cap can be use in Wiring in electrostatic precipitators
• WNR 1.4438 Cap are used in Oil refinery components
• AISI 317L Cap also useful for Gas scrubbing plants
• SUS 317L Cap are commonly used by Pulp and paper processing industries
• INOX 317L Cap are also suitable for Acetic, phosphoric and sulphuric acid processing plants
• Alloy 317L Cap available for Oil and Gas Production- offshore process equipment
• Offshore, sea water technology, chemical industry, good stability against reducing acids of medium strength like sulphuric acid and phosphoric acid and various chloric media, refinery, paper industry, pulp industry

Export Destinations for 317L Stainless Steel Cap

Steber Steel is a leading exporter and distributor of stainless steel 317L Cap in India and international markets such as Malaysia, Iran, Germany, UK, Canada, UAE, Bahrain, Indonesia, Mexico, Chile, Brazil, Peru, Nigeria, Kuwait, Jordan, Thailand (Bangkok), Saudi Arabia, Venezuela, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan. A widest range of SS 317L Cap ready stock available in Middle East countries including Bahrain, Iraq, Israel, Jordan, Cyprus, Egypt, Iran, Kuwait, Lebanon, Oman, Saudi Arabia, Syria, Turkey, United Arab Emirates, Palestine, Qatar and Yemen. Get best deals from distributor of 317L Stainless Steel Cap.

Domestic Supply Destinations for Stainless Steel 317L Cap and UNS S31703 Butt weld Cap

Our SS 317L products are supplied to all major Industrial areas and cities in India such as Mumbai, Ahmedabad, Chennai, Bangalore, Hyderabad, Assam, Siliguri, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Delhi, Vadodra, Nashik, Thoothukudi, Rajkot, Aurangabad, Salem, Bhilai, Bhiwandi, Bikaner, Jamshedpur, Warangal, Nellore, Agartala, Ranchi, Coimbatore, Raipur, Mysore, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Bhubaneswar and Faridabad. For any location in your country you can find here trader of Stainless Steel 317L Cap in India, If your requirement is urgent we can offer a priority shipping service, but also if time is not so critical we can offer more cost-effective options to ensure you get the best value for money.

317L Cap Price

• SS317L Cap Fittings, 36 Inch manufacturer MATERIAL:Stainless Steel, alloy steel and duplex steel
  FOB Price: US $0.5-10 / Piece
• Stainless Steel Sanitary Cap
  FOB Price: US $7.5-8.0 / Pieces
• Stainless Steel 317L Cap
  FOB Price: US $1.1-9.5 / Piece
• Stainless Steel Buttweld Cap
  FOB Price: US $0.5-110 / Piece
• 317L Stainless Steel Screwed Cap
  1000 Pieces (Min. Order)
• 317LStainless Steel Threaded Cap
  FOB Price: US $3.5-4.8 / Piece
• 317L welding/seamless Stainless Steel Cap
  FOB Price: US $2-26 / Piece
• Good price ANSI B16.9 seamless Stainless Steel Cap supplier
  FOB Price: US $1-10 / Piece
• Stainless Steel 317L Cap
  FOB Price: US $1-20 / Piece
• 317L Stainless Steel Cap at best price
  FOB Price: US $1-5 / Piece
• Sanitary Stainless Steel 317L Cap
  FOB Price: US $5-80 / Piece
• Ferrule fitting Stainless Steel large-diameter Cap
  FOB Price: US $2.5-5.5 / Piece
• ANSI ss317L Stainless Steel Cap 10 inch
  FOB Price: US $6-10 / Piece
• Stainless Steel Cap /welding Cap
  FOB Price: US $3-5 / Unit
• 317L Stainless Steel Cap with socket welded
  FOB Price: US $7.5-8.0 / Pieces
• Stainless Steel Cap For PPR Pipe
  FOB Price: US $0.34-0.66 / Piece
• Npt and Bsp female thread Stainless Steel 317L Cap
  FOB Price: US $1.0-1.2 / Pieces
• Cap pipe fitting sus 317L Stainless Steel Cap
  FOB Price: US $0.1-10 / Piece
• Cap Stainless Steel 317L NPT Screw Cap
  FOB Price: US $0.5-20 / Set

India’s Prominent manufacturer & supplier of Stainless Steel 317L Cap. We maintain bulk stock of 317L Cap. Supplier & distributor of Alloy 317L Cap globally in any size & schedule. We have a large inventory 317L Cap, UNS S31703 SS 317L screwed Cap, WNR 1.4438 SS Grade WP317L Cap, Source for ASME SA403 Stainless Steel WP 317L threaded Cap, Alloy 317L buttweld Cap. We have extended our stock program for you: ASME B16.9 stainless steel grade 317L Large Diameter and High Thickness ASTM A403 Seamless, Welded Stainless Steel Cap, available from stock.

Distributor, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM A403 WP317L Stainless Steel 317L Cap